Articulated Sea Turtle by FreddieMakerWorld: Download Free 3D Models

Freddie

Miniatures>Animals

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 15% infill

Designer

40 min

1 plate

4.6(109)

0.12mm layer, Top surface concentric, 0,45 mm line width.

57 min

1 plate

4.4(7)

Open in Bambu Studio

Boost

488

840

127

1.5 k

1.2 k

Released

Description

Arms and feet are movable. Printed @ 100% scale in both green and glitter rainbow. I apologize if you have issues with the print but I updated the model and have had success

Comment & Rating (127)

@JamesSheldon

Print Profile

0.2mm layer, 2 walls, 15% infill

printed full bed, will add some magnets and have nice family gifts of refrigerator turtle magnets.

The profile uploader has replied

@D3ADFR33D

They look amazing!

@iKandi

Print Profile

0.2mm layer, 2 walls, 15% infill

Support Issue:Left fin on all 3 prints failed

Strength Issue

Other Issues

The profile uploader has replied

@D3ADFR33D

Thank you for the feedback! I apologize for the issue and lost filament. I will look into this and get it fixed!

@cmille34

Printed in different colors, the left front flipper took a little convincing to break free and articulate on all 3 of them but eventually it started to flop around as expected.

@PepperCardPrint

Print Profile

0.2mm layer, 2 walls, 15% infill

No issues at all. looks fantastic. I realize now that it is a fast print. I was going to print something long while I was on vacation; however, this made me realize that on slow it still prints in a timely manner.

@Elite_Combat

Print Profile

0.2mm layer, 2 walls, 15% infill

It Looks so good !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@LP_26

Print Profile

0.2mm layer, 2 walls, 15% infill

Very cute. On the whole prints well. Glad I saw an earlier comment regarding the left flipper, as there definitely seems to be an issue there. it WILL come loose without breaking though, it just takes time and extreme care. On the whole, happy with the print and will do again. Thank you.

@user_3117690459

Issue with front left fin attachment. otherwise very cute and quick print.

@FZS_Customs

Print Profile

0.2mm layer, 2 walls, 15% infill

I needed to use up some filament and these were great!

@kingofaces2

Legs and arms keep falling off. Point of failure was on the part of the turtles. Filament could be the culprit.

@sadleviissad

Print Profile

0.2mm layer, 2 walls, 15% infill

omg these are adorable and fun to play with. the first batch failed miserably, but because I scaled tuem too small so the joints were too small/weak. so keep that in mind. but overall, great