Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PLA PolyTerra Muted Red Transmission Distance: 1
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #14 (1.2mm) swap to Gray
At layer #16 (1.36mm) swap to Muted Red
At layer #18 (1.52mm) swap to White for the rest.