If you have a multicolor-printer generating lots of poop/purge/waste - then use some of it with this game! It’s is made to have fun with your Bambulab poops - enjoy!

The rules are simple: don’t drop the poop - but the game is hard to master.. Try it!

Overview

The game is all 3D-printed and consists of the following pieces:

• Tower
  • Tower base
  • Tower extension 1
  • Tower extension 2
  • Tower extension 3
  • Tower top
• Beams (lots of them!..)

Assembly

The Tower should be easily assembled - snaps together - and when not in use, it can be taken apart to save some space.

Rules (Original 😁)

Setup for a round:

1. When the Tower is assembled, insert 4 beams in one of the top rows of the tower
2. Then you each take turn placing 1 Beam in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)
3. Fill purge/poop into the top of the tower - and then you are ready!

The game:

1. In turn, carefully pull 1 Beam out of the Tower (must be in a section/extension that contains poop!).
2. When a single purge/poop drops out at the bottom of the Tower in your turn - you loose the game/round!

Rules (Balanced 🤪)

Setup for a round: 

1. Do like Original rules above.

The game:

1. In turn, carefully pull 1 Beam out of the Tower.
2. If purge/poop drops out of the Tower in your turn, collect it. 
3. When all purge/poop is collected by players, the winner is the one with the most/least purge/poop (you choose!)

Note: this is an all new game - if you have suggestions on improving the rules or the model, please leave a comment or contact me directly!

Warning: as in Jenga, every fast move or careless shaking with the table can ruin your chances of winning - so be careful!

Rules (Strategic 🧐)

Setup for a round:

1. When the Tower is assembled, insert 4 beams in one of the top rows of the tower
2. Then you each take turn placing 1 Multicolor Beam (these cant be moved during the game! Total multicolor beams: 4)
3. Then you each take turn placing 1 Player Beam (in your color) in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)
4. Fill purge/poop into the top of the tower - and then you are ready!

The game:

1. In turn, carefully pull 1 Player Beam (in your color) out of the Tower (must be in contact with poop!)
2. If purge/poop drops out of the Tower in your turn, collect it. 
3. When no more poop is in the tower, the player with the most poop is the looser!

Print instructions

All parts should be fairly easy to print. But here is a few tips:

• Brim: Maybe. It can help with bed adhession on the tower parts. Not needed on the Beams!
• Supports: NO supports needed
• Multicolor: The tower extensions can be imported into the slicer and Split into parts, to easily color the different segments.

Happy printing!