Packout Feet Easy Alignment by CK Designs

CK Designs

Tools>Other Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

11.6 h

7 plates

5.0(52)

Open in Bambu Studio

Boost

254

604

119

921

543

Released

Description

This is my take on the attachable Packout feet. I have connected the feet in sets of two or 4 to make aligning them to the bottom of whatever you want to attach them to easier. I have also created a pair that have a locking tab on the front to more securely lock whatever you are wanting to attach, all you have to do is pull up on the tab and slide out almost like a normal Packout box. I have also added files for feet that can go down the middle of a box as well for anyone that would like the feet more centered, along with an individual foot that is a much tighter fit since it doesn't have a lock.

The third picture is showing the different screws that I have found that fit through the holes to mount them. The max size I have found that fits are #6 screws as well as M4 bolts. M5 bolts will work as well but you will have to use the screw or a tap to thread the plastic.

The last picture is showing an M4 bolt coming up through the bottom of the foot and I thought that you could use a paint pin to mark the top of the bolt and press whatever you are wanting to mount onto it so it will mark the holes perfectly.

Comment & Rating (67)

@aceof5pades1

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

As usual CK delivers phenomenal quality designs. These worked perfectly for my application. They slide into place with just the right clearances and the latch works in spite of its simplicity, which is actually a positive in my book

@Sean.

Print Profile

0.2mm layer, 2 walls, 15% infill

looks good, adding to my m18 shop vac

@XOakX

Print Profile

0.2mm layer, 2 walls, 15% infill

came off the plate nice and easy thanks a bunch

(Edited)

@user_1512857207

Boosted

Awesome, could you do the same with the receiver end like this: https://makerworld.com/en/models/391156?from=search#profileId-292181

The designer has replied

@CK_Designs

I actually do have something like that almost completed already I've just never posted it. Ive been thinking about making them more slim so they use less material and take less time to print

@CK_Designs

my first prototype came out good, I'm adding two more cleats underneath these though so there will be 4 total and the tab at the top locks the boxes in place

@user_1512857207

Boosted

Replying to @CK_Designs :

wow that would be sweet. I'd love to be able to mount some of the slim organizers on the wall and this would make it so much quicker to do!

@Brumei

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2702525316

Print Profile

0.2mm layer, 2 walls, 15% infill

fit is excellent, lock snaps audibly into place, no slop.

@3PedalMINI

you wouldn’t happen to have a design to be able to mount packouts to a surface would you? IE: wall or floor of a vehicle?

The designer has replied

@CK_Designs

something like this? https://makerworld.com/models/480050

@Rizzo

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

deleted the middle brace on plate 2 so I could print on A1 mini. great design and came out perfect.

@tml2868

Boosted

@Jimmer

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

works great

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.