Helmet Display Stand (Variable/Adjustable Height) by Codyinbody3

Codyinbody3

Art>Other Art Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

(Sturdy) 0.22mm layer, 3 walls, 8% infill

Designer

3 h

1 plate

4.9(66)

Open in Bambu Studio

Boost

465

533

734

319

Released

Description

Since my wall mount helmet display did so well, I decided to release my standing helmet display stand. This stand can be either as tall or as short as you need and each piece of the rod take a good amount of pressure to fit on but I tend to twist while pushing it on so that way it fits tight and snug. Once its put together it's solids and sturdy along with having a sleek and slim design to not look like a lot of those other bulky stands that are geared towards a certain genre with emblems or other identifying marking where you can only use the stand for certain helmets. Enjoy!

Comment & Rating (83)

@Gintoki

Boosted

Print Profile

(Sturdy) 0.22mm layer, 3 walls, 8% infill

The perfect height...Just used 3 stacks and it looks awesome

@wilsolucoes

Hello friend, where can I find STL Deadpool helmet

@Gintoki

Boosted

hi! look up yosh studios in Patreon

@drunklight

Print Profile

(Sturdy) 0.22mm layer, 3 walls, 8% infill

ironman helm. needed only 3 out of the 4. steady and awesome. easy print

@phoenixjj

This worked great for my GI Robot

@NEPepper

Print Profile

(Sturdy) 0.22mm layer, 3 walls, 8% infill

it fits very snug but didn't break while putting it together so I like it. looks very good

@Tom.zrk

Boosted

Print Profile

(Sturdy) 0.22mm layer, 3 walls, 8% infill

fits perfectly

@Chato829

for those wanting the helmets, they are from Yosh Studio, go support that guy. great work on the stand, about to print a ton of those for myself

The designer has replied

@Codyinbody3

Thank you! Print away! I like to put a little strip of electrical tape in a cross shape on the top so it gives the helmet good frictions and holds it in place good. Or you can print the top in TPU but that would take awhile since you have to print that slow.

@Codyinbody3

Please rate this model honestly if you can after you've printed it!

@Terrancecgclark

Print Profile

(Sturdy) 0.22mm layer, 3 walls, 8% infill

@Mattman0903

Print Profile

(Sturdy) 0.22mm layer, 3 walls, 8% infill

Perfect

@Codyinbody3

Thank you for your feedback!

@charliegb0220

What filament did you use for the PikaPool helmet?

The designer has replied

@Codyinbody3

Sunlu Pure Yellow, Hatchbox Iron Red, Sunlu Matte Black, and Esun Cool White PLA

@Appice

how can get the pikachu deadpool helmet?

The designer has replied

@Codyinbody3

You'll have to subscribe to Yosh Studios Patreon and then be there for a few months before you can go back and purchase previous months rewards. It may have been last month so you might get it but you can also purchase the STL off Etsy I believe.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Samurai Helmet - Display

Mango3D

Display stand 2

Babylone

359

218

Tiered Display Shelf

Tasmim3D

Orbiting Light Display with Martian City

GIF

Orbiting Light Display with Martian City

MaKim

269