Hex Epoxy Resin Mixing Trays, Mixers and Container by dimensionaldesignky

dimensionaldesignky

Tools>Other Tools

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Mixing Trays Only - 0.28mm layer, 250 walls, 100% infill

Designer

6.2 h

5 plates

5.0(18)

Container Only - 0.2mm layer, 4 walls, 10% hex infill

Designer

1.5 h

1 plate

5.0(9)

V2, A1 mini, Tray and Container on 1 plate

1.8 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

169

195

121

Released

Description

Hex mixing tray set for epoxies, resins, etc.

I previously downloaded a set similar and had a few issues - So here is my own.

Issues: Trays were too small, too thick, mixer was hard to remove, mixer was too fragile, container was bland - All of these issues are addressed

Tip: Removing trays from build plate. - I don't bend each off the build plate while its in the printer. I remove the build plate, let it cool, turn it upside down and flex the build plate. They just all drop off and don't deform.

Hope someone gets to enjoy these!

Thank you for your interest

Boost Me (for free)

Thank you!

Comment & Rating (56)

@ChrisConnor

Print Profile

Container Only - 0.2mm layer, 4 walls, 10% hex infill

great model printed fine.

The designer has replied

@dkgoodrich

Ty!

@dkgoodrich

Thank you! Like the white, its clean!

@fillodonnell

Print Profile

Container Only - 0.2mm layer, 4 walls, 10% hex infill

perfect thank you

The designer has replied

@dkgoodrich

Thanks brother!

@fillodonnell

Print Profile

Mixing Trays Only - 0.28mm layer, 250 walls, 100% infill

Thank you. Something I never knew I needed but I do. No more mixing on random things I have laying around.

The designer has replied

@dkgoodrich

Great to hear they work out for ya! Thank you!

@bambooster

Excellent model. I would like to add that if it is necessary to apply adhesive in narrow spaces, my model could be useful. Take a look: https://makerworld.com/en/models/568860#profileId-488784