Classic birdhouse with mounting bracket.

Copyright Claim

Classic birdhouse with mounting bracket.

Boost
258
447
77

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.16mm layer, 3 walls, 25% infill (strong)
0.16mm layer, 3 walls, 25% infill (strong)
Designer
23.6 h
2 plates
4.9(37)

0.16mm layer, 2 walls, 15% infill (fast)
0.16mm layer, 2 walls, 15% infill (fast)
Designer
19 h
2 plates
5.0(15)

Open in Bambu Studio
Boost
258
447
77
49
618
229
Released

Description

Classic birdhouse with mounting bracket | By Techro3D

 

  • Water drainage.
  • Fresh air through ventilation ducts.
  • Mounting bracket.
  • Opening of Ø32mm.
  • Removable roof.
  • 100% printable.

Comment & Rating (77)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill (fast)
Great design prints really well, suggest using a different support interface to make clean removal as well. Will likely print a few in different PTEG colors. I went with PTEG so hopefully stands up well.
(Edited)
1
Reply
Boosted
did you need to add any supports for the opening with PETg? getting ready to print this myself and wondering if that opening needs support.
0
Reply
Boosted
Replying to @SVCprints :
NO - printed as is... only thing I changed was on the perch, pins & screws that attach everything is I made 75% infill for strength.
0
Reply
Boosted
Replying to @TJSlayer :
awesome, thanks! haven’t messed with PETG a ton and always heard it’s not as good with overhangs so just wanted to make sure!
0
Reply
Printed in ASA and they are awesome!
3
Reply
okay I admit I may have gone a little overboard in printing these bird houses. again. but it's such a great design and print so nicely. Since they're going to be outside I printed mine using petg.
1
Reply
Which color/brand green did you use? It looks great.
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill (strong)
Gedruckt in PETG, wunderschön. Danke
1
Reply
Boosted
Print Profile
0.16mm layer, 3 walls, 25% infill (strong)
Printed really beautifully in yellow PLA and black PETG The birds are going to love it!
(Edited)
1
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill (strong)
lækkert
1
Reply
Great birdhouse, i love it
1
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill (strong)
Great birdhouse, hope some birds will move in.
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill (fast)
I love the style of bird house. Just needs a different mount option. I mount mine on top of pipe to keep out of reach of cats.
1
Reply
Super Modell.
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.