AMS Silica Desiccant Container

AMS Silica Desiccant Container

Boost
26
52
14

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
41 min
1 plate
5.0(14)

Boost
26
52
14
1
131
98
Released

Description

AMS Silica Desiccant Container

Simple and easy to print.

 

It uses a modifier for the venting holes so you can use any infill pattern you want by modifying the object in bambu studio. The pink one is PETG with 35% Honeycomb infill and the white one is PLA 25% Honeycomb infill, 25% is better but small pieces of desiccant may fall through when filling it.

 

White shows the desiccant colour better, I will be replacing the pink one so that I can easily see if the desiccant has changed colour and needs to be dried, I do not plan on changing the desiccant inside, I will just dry the entire container in my food dehydrator.

 

Fill the top about 2/3rds full and simply slide the bottom over it, it should be a snug fit but this depends on your printer and filament, my pink one is a little looser than the white one but both work well and hold them self together.

 

It holds about 40-50g of desiccant.

Comment & Rating (14)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
worked perfectly and super easy to fill up and remove the lids, they fit in the AMS slot without getting stuck or pressed. nice model! love the vent style.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect print
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply