Samurai

Copyright Claim

Samurai

Boost
11
7
0

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.4mm nozzle, 0.08mm layer, 2 walls, 15% infill
0.4mm nozzle, 0.08mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate

0.2mm nozzle, 0.08mm layer, 1 walls, 100% infill
0.2mm nozzle, 0.08mm layer, 1 walls, 100% infill
Designer
5.3 h
1 plate

Boost
11
7
0
1
22
4
Released

Description

Spanish

Imprimir al 100% de relleno con una altura de capa de 0,08 mm con una capa base de 0,16 mm

Filamentos usados:

PLA 3DFILLS NEGRO Distancia de transmisión: 0.4
PLA JAYO ROJO Distancia de transmisión: 2.3
PLA JAYO GRIS Distancia de transmisión: 0.8
PLA GEETECH BLANCO Distancia de transmisión: 6

INSTRUCCIONES DE CAMBIO DE FILAMENTO:
Iniciar con Negro
En la capa #11 (0.96mm) cambiar a ROJO
En la capa #13 (1.12mm) cambiar a GRIS
En la capa #22 (1.84mm) cambiar a BLANCO hasta el final

English

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA 3dfills negro Transmission Distance: 0.4
PLA Jayo rojo Transmission Distance: 2.3
PLA Jayo grey Transmission Distance: 0.8
PLA Geetech White Transmission Distance: 6

Swap Instructions:
Start with negro
At layer #11 (0.96mm) swap to rojo
At layer #13 (1.12mm) swap to grey
At layer #22 (1.84mm) swap to White for the rest.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more