A1 mini Plate Holder Ikea Skadis/Uppspel by eds_3d_shop

eds_3d_shop

3D Printer>3D Printer Accessories

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Designer

2.2 h

1 plate

5.0(43)

PETG with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Designer

3 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

213

106

345

232

Released

Description

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

Skadis/Uppspel (IKEA) holder for 4x A1mini build plates!

Skadis/Uppspel-Build plate holder for A1mini. This can hold 4 build plates very comfortably! 👌

This holder was specially designed to be very narrow while still holding the plates very well, and it can be attached to the popular Skads/Uppspel pegboard from IKEA to save space on the maker table. 😉

This holder is easy to print on the A1mini - just use my well tuned print profiles.😍 I used two “Mice-Ears” for better bed adhesion and two tree supports for upper hooks there - just remove them off easily after printing (with pliers/cutter knife)👍

If you don't want to use print profiles - STLs with and without “Mice Ears” are attached here too. Just print them with default PETG/PLA settings.

Print Instructions:

just use your favorite default PETG/ PLA profile, BUT - set your printer better to the “silent” mode for better quality of the walls!

— ! —

Thanks for downloading and rating in advance and please don't forget to like this model! :-)

Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me https://linktr.ee/eds_3d_shop and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (106)

@Leslie9898

Boosted

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Great compact design. can fit between the wall and the Skadis board

The designer has replied

@eds_3d_shop

Yea, I needed such slim design for my purpose too! 🦾😎🙏Thank you for your awesome rating and feedback!🙏😍👍 If you like this design and want to support me - please boost 🚀 this design and print my perfect tuned print-profiles! 🙏😍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃👍

@Leslie9898

Boosted

Replying to @eds_3d_shop :

For sure. Boosted!

@eds_3d_shop

Replying to @Leslie9898 :

Thank you very much for great support! 🙏😍👍

@Lothum

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Finally tested high speed filament. Note: inside is a little tight for these aftermarket pei sheets. Official plate fits Perfectly.

The designer has replied

@eds_3d_shop

Hi! 🖐️😃 Thank you very much for great feedback and make! 🙏😍👍 It was perfect for my plates here, I will make the slots a little bit bigger, just for the case 🦾😎🙏

@eds_3d_shop

Hello! I revised the holder accordingly and it is online (v.4) Now the slots a little bit bigger. Thank you for helpful feedback! Ed 🙏😉

@frankschoewer

Boosted

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Top! Perfect fit, excellent construction

The designer has replied

Show original

@eds_3d_shop

😍👍Thank you for the fantastic feedback and amazing make! I'm thrilled you like it! 🙏😍👍 If you wish – a click on the boost button (or the little rocket on the website) will greatly support my work on such designs! 🙏😍 I also have more designs like this for Bambu Lab 3D printers, feel free to browse! Many thanks in advance! Best regards Ed 🖐️😃

Show original

@klimu666

Print Profile

PETG with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Perfect.

The designer has replied

@eds_3d_shop

Great make! 🦾😍🙏Thank you for your awesome rating and top feedback! 🙏😍👍 If you like this design and want to support me - you can boost 🚀 this design and print my perfect tuned print-profiles! 🙏😍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃👍

@_tbf

Boosted

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Perfect!

The designer has replied

@eds_3d_shop

Yeah! 🦾😎🙏Thank you for your awesome rating and feedback!🙏😍👍 If you like this design and want to support me - please boost 🚀 this design and print my perfect tuned print-profiles! 🙏😍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃👍

@Joe_stllf

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

all good

The designer has replied

@eds_3d_shop

Cool make!🦾😎🙏Thank you for your awesome rating and feedback!🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃👍

(Edited)

@user_3092111482

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

It works well!

The designer has replied

@eds_3d_shop

🦾😎🙏Thank you for your awesome rating, feedback and cool make!! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃👍

(Edited)

@AntonioC

Boosted

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

with only one color, especially white, the writing is not visible... but hey, it's perfect!! thanks

The designer has replied

Show original

@eds_3d_shop

🦾😎🙏Thank you for your awesome rating, make and feedback ! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃👍

@azzywazzy

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Looks good! Nice fit for the sheets and looking forward to mounting it up on the Skadis. Shall add another picture once I do.

The designer has replied

@eds_3d_shop

Great! 🦾😍👍Thank you for your awesome rating and cool make! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😍👍

@Plotterbilly

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

passt super. Vielen Dank

The designer has replied

@eds_3d_shop

🤩Freut mich sehr das zu sehen! Super make! 😍👍Ich hoffe, ich darf das Bild in Description mitnehmen? Sieht toll aus! Mit einem Klick auf das Boost-Button (oder kleine Rakete auf Website) werden Sie meine Arbeit an solchen Designs sehr unterstützen! 🙏😍 Ich habe noch mehr von solchen Designs für BambuLab 3D Drucker, gerne nachschauen! Vielen Dank im Voraus! 🖐️😃

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.