Sidemount P1S AMS Printbed & IKEA Skadis board by DenoD

DenoD

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

Designer

11.6 h

1 plate

4.2(9)

Side panel for multiple AMS systems with different rev's

Designer

11.6 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

145

126

Released

Description

This is the second design I made for the collection of 3 printbeds to be mounted on the side of the P1S/X1C. This time i closed the side and added a Skandis IKEA panel so you are able to mount any self printed boxes/brackets you might need.

Take a look at the first design as well. Let me know what you think!

https://makerworld.com/en/models/388677

And i just now also released a side mount for the other side of the printer that can hold an external spool, check it out at: https://makerworld.com/en/models/539184

Please check AMS gaps before printing one or the other print profile!

Boost Me (for free)

I would appreciate the boost!

build plate holder x5

skadis accessory holder

Comment & Rating (25)

@M0x61rC

Unfortunately, it does not fit my AMS.

The designer has replied

Show original

@DenoD

ah man… sorry… can you tell me what the dimensions are of the ribs of the arms? I can then adapt the model.

@M0x61rC

Replying to @DenoD :

First Chamber 63,5 mm Middle Chamber 86.0 mm Last Chamber 63,5 mm The first and last chamber is 65 mm wide, but there is a small bridge there, so that the width is reduced to 63.5 mm. I will cut the faulty print to fit my needs so I can use it.

(Edited)

@DenoD

Replying to @M0x61rC :

fantastic! thank you! I will adapt the model ASAP and send it over to you!

@user_480261723

Boosted

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

Perfect result Superb model

The designer has replied

Show original

@DenoD

Wow! Thanks for the two boosts man! I appreciate it!

@AmoBraga

Boosted

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@DenoD

I doesn’t fit with your ams, you should have checked the design with the slots in your ams before printing it. so there is nothing wrong with the print profile….

@AmoBraga

Boosted

Replying to @DenoD :

Sorry my Bad 🙈 but i have cut it and it‘s ok for me 👍

@DenoD

Replying to @AmoBraga :

thanks!🙏

@user_2217851976

Print Profile

Side panel for multiple AMS systems with different rev's

Super Idee

@M0x61rC

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

Support Issue:Skadis holes not well printed. More support should be used here.

The designer has replied

@DenoD

that wasn’t necessary with my print. do you have your printer calibrated correctly for overhangs? because the holes are so small they don’t need supports.

@M0x61rC

Replying to @DenoD :

yes of course, but I use petg not even pla and some more support could help

(Edited)

@DenoD

Replying to @M0x61rC :

ok, but that profile was for PLA, not PETG, so when changing filament in a profile make sure to change other parameters as well. that’s basic 3D printing right?

@Dustinator

It does not fit in my AMS. Very unfortunate for a 16-hour print. I also do not understand why it does not fit. Are there multiple AMS?

(Edited)

The designer has replied

Show original

@DenoD

yes, there are a few different revisions of AMS on the market. I did not know either when I first made this model. I did add a new print profile to this model yesterday. check that one out.

@user_58267824

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

Project printed well

@IRoan

Boosted

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

The designer has replied

@DenoD

thanks for the boost! 🙏

@karamac.84

Boosted

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

@user_3826561966

Print Profile

Incl Skandis panel 0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

248

Print Profile(2)

Description

Comment & Rating (25)

License

Related Models

Original Sized IKEA SKADIS Shelf

skadis ikea panel light version 225x225mm 5t

Top Shelf for IKEA SKADIS pegboard

Modular and Customizable Shelf for Ikea Skadis