Cracked Dragon Egg Bowl by Tri-3D

Tri-3D

Art>Sculptures

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

Single Colour 0.2mm layer, 3 walls, 5% infill

Designer

3.3 h

1 plate

4.9(22)

Multi-colored 0.2mm layer, 3 walls, 5% infill

Designer

15.9 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

208

302

174

Released

Description

Can be printed with 2 walls… But 3 give more strength
Also 5% infill works well. Increase for more strength

For Commercial Rights To This Model:
https://www.patreon.com/Tri_3D

Comment & Rating (33)

@BB01

Print Profile

Multi-colored 0.2mm layer, 3 walls, 5% infill

Had some troubles with purge and color change, but can't confirm if it is due to the profile or some other error...

(Edited)

@Tri3D

What machine was this printed on? The profile does have very low Purge time to cut print time down. But iv never had an issue on my P1S. This issue has given me a new idea though. Ima look into making the scales a sleeve to fit around my normal eeg design. So it wont need an ams Thanks for bringing this to my attention

(Edited)

@BB01

Replying to @Tri3D :

P1S, and I couldnt figure out why it happened 😅 do you think you can get it to a gradient? 😅

@user_2051710147

Boosted

Print Profile

Single Colour 0.2mm layer, 3 walls, 5% infill

Excellent print, came out just as expected.

@user_3894753973

Print Profile

Single Colour 0.2mm layer, 3 walls, 5% infill

Came out perfect...thank you!

@Berryz

Print Profile

Single Colour 0.2mm layer, 3 walls, 5% infill

perfect size for my keys

@TheGoodDub33

Print Profile

Single Colour 0.2mm layer, 3 walls, 5% infill

If I were to reprint it, I would add more infill so that the print of the egg's bottom would be cleaner. But it is beautiful, it is the only cracked egg on MakerWorld, it's truly original. And by the way, I adore this silk filament from Bambu.

Show original

@fluffi_burger

can u make a link to the dragon model

The designer has replied

@Tri3D

The dragon is a paid model form CinderWing

@xxLASWSxx

Print Profile

Single Colour 0.2mm layer, 3 walls, 5% infill

printed great I kind of wish that it was more shallow or wider I had a hard time finding something that I could put inside of it I mean it would make a great dish for keys or something but I was trying to find a mini that would fit in there nicely any suggestions I'd love to know

@Tri3D

Thanks for the review. I will look into making it deeper. What design would you like to try to fit in there. so i have a reference

@Turkishfilms

Do you have inner and outer as two files?

@FantsyWigetsAk

Boosted

Print Profile

Single Colour 0.2mm layer, 3 walls, 5% infill

Truned out amazing and print file worked great was even able to upscale with no issues.

@user_3090850744

Hello :) Is there a matching dragon for this?

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.