Slide On Lid For Long Packout Bins by CK Designs

CK Designs

Tools>Other Tools

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

5.0(22)

Open in Bambu Studio

Boost

162

496

515

224

Released

Description

This is a lid that slides onto the long bins that come with Packout organizers. These lids will fit on the shallow and deep bins.

Comment & Rating (35)

@bitsniffer

Print Profile

0.2mm layer, 2 walls, 15% infill

great addition to the bins I have left over from using the cases for CK designs ammo holders

@CK_Designs

That's a perfect use for them! I will say from my tests that they will come out of the holes from the top tray of the 22s though.

@bitsniffer

Replying to @CK_Designs :

the 22 ammo will fall out of the top tray when in a pack out?

@CK_Designs

Replying to @bitsniffer :

no I just meant if you use these slide on lids they will fall out of the top tray. the lid on the actual box keeps them in place

@user_3156096231

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Designs are perfect, I just had damp filament!

@fireted

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Fantastic , not all my junk in my bins won’t fall over and spill when I tap the brakes

@Sean.

Print Profile

0.2mm layer, 2 walls, 15% infill

fits like a glove

@LouieDog420

will these fit on the ammo boxes ?

The designer has replied

@CK_Designs

I'm assuming you're talking about the ammo inserts that I designed for these bins? If so they will work on top of those, but from my brief testing the top tray of 22 will come out of the holes.

@LouieDog420

Replying to @CK_Designs :

sweet thanks

@9001CUBES

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect fit the latch it much smoother on this one than the other version i tried!

@CK_Designs

I'm glad to hear it worked out well for you!

@maceinc

Print Profile

0.2mm layer, 2 walls, 15% infill

fits perfect, no problems printing

@CK_Designs

Awesome, I'm glad they worked!

@3DPrintingVibes

Print Profile

0.2mm layer, 2 walls, 15% infill

works great had a few issues with bed adhesion because of ABS but great profile !

@CK_Designs

I'm glad they worked! I never tried them in ABS but I would assume that was an ABS issue since it likes to warp.

@flynn

Print Profile

0.2mm layer, 2 walls, 15% infill

awesome print , thanks

@CK_Designs

Thanks! I'm glad you like it!

@user_2802768165

prints well and fits perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.