华为GT 38无线充电器支架/Huawei GT 38wireless charger holder

Copyright Claim

华为GT 38无线充电器支架/Huawei GT 38wireless charger holder

Boost
1
0
0

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.12mm layer, 2 walls, 15% infill
0.12mm layer, 2 walls, 15% infill
Designer
2.1 h
1 plate

Open in Bambu Studio
Boost
1
0
0
0
13
1
Released

Description

实用于华为GT Cyber无线充电器的支架,以及同样38mm左右的(gt3,4,runner等)华为手表无线充电器。

无需支撑,推荐使用pxa或petg,0.12层进行打印。

3mf文件为默认填充,需要手扶右侧拿下,可适当增加使支架更稳固,实测cyber默认填充很稳定

背后设有线槽,可以把线压进去梳理

 

A bracket suitable for Huawei GT Cyber wireless chargers, as well as Huawei Watch wireless chargers with a size of approximately 38mm (GT3, 4, runner, etc.).

 

No support required, it is recommended to use PXA or PEG for printing with 0.12 layers.

 

The 3mf file is filled by default and needs to be removed by hand on the right side. It can be added appropriately to make the bracket more stable. The actual measurement shows that the default filling for cyber is very stable

 

There is a wire groove at the back, which can press the wire into and sort it out

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more