A Qi wireless charger phone stand for your Pixel 6a (with aftermarket Qi receiver) and with room for a play.date gaming console!

Update 20/March/2024: adding CAD source links for anyone eager to remix/modify/etc

• Onshape source [link]; for the [shim] and [phone stand]
• Tinkercad source: [link]; for the [base]

-----

Print as 3 separate parts: [base], [phone stand], and [shim]

Building the phone stand:

1. Slide the Qi charger into the top slot of the [phone stand] with USB connector facing downward.
2. Route a USB cable through the hole in the back of the [base] and up into the Qi charger.
3. Slide the [shim] into the top of the [phone stand], behind the Qi charger, to press it forward toward the vacant area your phone will later occupy.
4. Slide the [phone stand] into the large opening in the [base] with the Qi charger facing the two smaller slots.
5. The printed object is now fully assembled! it should hold together by friction alone, but feel free to use some superglue as desired.

Using the phone stand:

1. Drop your Pixel 6a with aftermarket Qi charging receiver onto the phone stand.
2. The Qi charger will align perfectly if using the same Qi charger as I use (recovered from a Relay Pro retail package).
   1. If the alignment is off you might want to modify the design before building (and especially before using superglue).
3. The two smaller slots in the front of the [base] are designed to receive a [play.date] gaming console.
   1. If your play.date includes the (optional) OEM cover: please open the cover, fold it behind the play.date, and slide the cover into the smaller slot while sliding the play.date into the larger slot at the front of the [base].