Ancient Guardian Articulated from Zelda by Crafty Sven

Crafty Sven

Toys & Games>Characters

Print Profile(8)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

2.9 h

1 plate

4.8(329)

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

Designer

13.3 h

1 plate

4.8(50)

0.16mm layer, 2 walls, 15% gyroid infill, no brim

3.5 h

1 plate

4.9(59)

0.2mm layer, 2 walls, 10% infill

3.2 h

1 plate

4.7(73)

Click to see more

Open in Bambu Studio

Boost

1540

2849

601

280

3.6 k

Released

Description

No supports needed. Make sure that the bed is clean and the first layer adheres properly, glue is recommended.

Good luck and happy printing ! ^-^

I suggest trying the non AMS version 1st to see if you like the design and size.

You can scale this up to 150% !

Comment & Rating (601)

@tmelsh

Turned out great! Used 3 colors on x1c and took about 13h23m. Doing a 4 color now. This is Bambu solar breeze gradient, marble white, glow in the dark yellow. Used the AMS 4 colors version on textured pei.

@NotAGuyWithAGun

quick question hot the heck do you get glow filament print???

@tmelsh

Replying to @NotAGuyWithAGun :

I just used the bambu glow filament. :)

@NotAGuyWithAGun

doesn’t work by me

@3DStubeMinden

Print Profile

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

My son freaked out for this ❤️

The designer has replied

@CraftySven

amazing color combination 🧡 thank you !

@aaron.carey428

Print Profile

0.2mm layer, 2 walls, 10% infill

I’m not sure what happened but it looks like it peeled up from bed and they went crazy!

The designer has replied

@CraftySven

oh no ! sorry to see this 😢 I'm glad your nozzle didn't get messed up. It seems like an adhesion issue. Can be a bit of draft wind that causes this, or curling. A glue does help with this.

@aaron.carey428

since it’s a p1s with door closed it wasn’t a draft but I think it was bed adhesion. I’m going to try again as another print peeled a little and I tried it again with 20 degrees higher bed temperature and it printed much better. I’ll let you know after I try again.

@mcclanelocock12

that happens with me you just need to dry the filament or clean the plate

@Claw501

Print Profile

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

Scaled down to 80% so I could fit 3 (or 4) and added a brim. Printed great!

@jkc135r

oh wow cool! how long did they take to print?

@Claw501

Replying to @jkc135r :

I believe it was a 16 hour print

@user_338235382

Print Profile

P1S specific settings

ahh once again a piece of art, its more ugly than idk, the print failed idk what specific settings these are but they are aqfull

(Edited)

The designer has replied

@NeoBlack

Your rating is unfair and awful; it is not the model or the print profile but a printer or filament issue. This kind of rating needs no one. So many people already printed this model without any issues. Maybe you should think about it before creating such a rating.

@user_338235382

bro i cleaned the bed before and printed the same model with another profile with the same filament so its none of these

@jenna.layne.cun

Replying to @user_338235382 :

I printed zero problems. Calibrate your machine and try again?

@Strix

Print Profile

0.2mm layer, 2 walls, 10% infill

it came out near flawless. there was only 3 small parts of the print that came loose during printing on the bottom of the body. that are barely noticeable, but I feel like this fault was more of a printer fault than the print profile and I need to do some maintenance on the lead screws lol. 5 stars! will reprint after maintenance and update.

@eebee

one of mine also fell if so the problem could be in the profile or just bed adhesion

@henwy

Boosted

I only have one too

@henwy

Boosted

does the head spin?

@brassvr_1432

Boosted

no but there is a remix that someone made that the head spins

@henwy

Boosted

Oh, OK.

@iwantpopcorn

Hi there! Very awesome looking design! I'm just having trouble making it all one color. How do I change the two objects on the outside plate to be the color I want? In my attached screenshot, I set everything to white, but there are still black sections in the preview. How do I fix this? Thank you!

The designer has replied

@iwantpopcorn

Oh actually, I just tried splitting it into parts and was able to set everything to one color. Do you know why I wasn't able to set it to one color before splitting into parts though?

@CraftySven

Thanks. Just press the minus button on the filaments and that will remove them from the current slicing profile.

@PengoAuthority

Print Profile

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

Color layers are too thin or obscurely placed, making weak wall lines that either don't show up well, or look like errors in details. look at the white/brown edge of the legs, and the brown/black above where the legs connect to the body. Could use a repaint.