K Cup Modular Magnetic Holder
K Cup Modular Magnetic Holder
Print Profile(1)
Description
A magnetic K Cup holder that can be attached to any magnetic surface most likely the side of a fridge which is where mine is currently located. They can be stacked on top of each other and will attach with magnets. I have updated the design with version 2.0 that includes friction fit magnet holes, plus 2 additional posts for the magnets for improved attraction to the metal surface.
Version 2.0
For version 2.0, the magnet holes are specific for 10mm x 3mm magnets. The magnets fit into the holes tight so no glue should be needed. If you would like to glue the magnets I would recommend using E6000 glue to hold my magnets. These were the specific magnets that I purchased:
https://www.amazon.com/dp/B09TPJ5FV2?ref=ppx_yo2ov_dt_b_product_details&th=1
Version 1.0
The spacing between the magnet stands and the backing is 3mm. The round place holders are 18.5mm round. The specific magnets I used are 18mm x 3mm which can be purchased here:
https://www.amazon.com/dp/B0BDFFCSKT?psc=1&ref=ppx_yo2ov_dt_b_product_details
The magnets overhang a little bit on the stands, but hold the model just fine.
This is meant to be printed with the front face down without supports. I printed this with a .6 mm nozzle with .3mm layer height in Matte PLA.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)