Side Mount Spool Holder Adapter for Bambu Lab X1/P1P

Side Mount Spool Holder Adapter for Bambu Lab X1/P1P

Boost
17
28
20

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

(Strong) 0.2mm layer, 6 walls, 25% infill
(Strong) 0.2mm layer, 6 walls, 25% infill
Designer
2.3 h
1 plate
4.8(6)

0.2mm layer, 6 walls, 25% infill
0.2mm layer, 6 walls, 25% infill
2.2 h
1 plate
4.7(13)

Boost
17
28
20
0
58
49
Released

Description

The other side mount spool adapters weren't quite what I wanted so I designed this one.

This adapter will not interfere with the PTFE tube coming from the AMS unit like some others did.

You will need (4) M3 x 20mm screws and (2) M3 nuts to use this adapter.

 

Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.

 

If you like this project, please don't forget to Like and Rate!

 

Updates

2023-04-20: I printed Bambu Lab Spool Roller by thrutheframe and I needed to mount the stock spool holder upside down. The original design prevented this because the counterbore was only on the right hole. I've updated the model to counterbore both of the bracket screw holes.

2023-03-10: Reworked the slots and added holes to force more walls and produce a stronger arm.

2023-03-09: Changed end fillets to chamfers to assist with bed adhesion.

Printing tips

I printed this with a 0.4mm nozzle, 0.2mm layer height, 8 perimeter walls, and 50% gyroid infill so that's a good place to start for a strong result.

Comment & Rating (20)

Please fill in your opinion
(0/5000)

Print Profile
(Strong) 0.2mm layer, 6 walls, 25% infill
Prints awesome, it's sturdy and precise.
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
No issues, great print
0
Reply
Print Profile
(Strong) 0.2mm layer, 6 walls, 25% infill
perfect
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
exactly what I needed! solid file and excellent use
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
good design but could use better holes for better reinforcement
0
Reply
Print Profile
(Strong) 0.2mm layer, 6 walls, 25% infill
The designer has replied
0
Reply
Did you have an issue with the print?
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
(Strong) 0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
(Strong) 0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
(Strong) 0.2mm layer, 6 walls, 25% infill
0
Reply