Spool Holder for Ikea Pegboard Skadi by andyschettini

andyschettini

Household>Office

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

52 min

1 plate

4.1(18)

0.24mm layer, 2 walls, 15% infill

48 min

1 plate

4.4(5)

Open in Bambu Studio

Boost

111

265

276

170

Released

Description

Here is a Spool Holder for the Skadis Pegboard from Ikea. I'm working on a small one for the mini spools.

((YOU NEED TO PRINT THIS WITH PETG)) You can print it with PLA, but PLA can breaks very easily

If you like my work and want to thanks me, buy me a coffe. :)

https://www.buymeacoffee.com/andyschettini

Comment & Rating (36)

@Holyvision

Print Profile

0.2mm layer, 2 walls, 15% infill

Wouldn’t use again, the print is fine but the fit into the Skadis is very loose — too loose for weight to grab. Printed in PETG-CF for strength but the issue is the hooks are not tight enough. Wanted to use to feed TPU but will find a different holder. Prints fine looks good, but not a great fit for my boards.

The designer has replied

@andyschettini

That is really strange. The reason why I don’t recommend PLA it’s because it’s really tight and you can break it. but you do it on PETG, so it can be 2 things by any chance, do you break the little legs removing the supports? or do you adjust the size by mistake? I was looking the 2 pictures I can see that maybe one or two of little 4 “legs” are not good.

@andyschettini

Can you show me the back of the print

@Holyvision

Replying to @andyschettini :

I’m going to give it a go again with normal PETG. I think filament shrinkage may be in play and a small ‘knub’ of arms could help for different stuff. 2-stars only reflects personal usage success and not quality of print!

@kopanja

Print Profile

0.2mm layer, 2 walls, 15% infill

printed nicely however broke the moment I attached it to my skadis pegboard (before I even got a chance to put a spool on it)... might try to print it in PETG next time

The designer has replied

@andyschettini

I forgot to put it in the description, im sorry, but def you need to print this on PETG. PLA breaks very easily. I made mine with PLA and they are fine, but, PLA is bad for stuff like this

(Edited)

@kopanja

Replying to @andyschettini :

Thanks for the update! I've uploaded another profile, and with this orientation we have more support (which spans-off super clean so not an issue) but the print is few minutes faster (due to the increased layer height) and model i super strong even when using PLA

@andyschettini

Replying to @kopanja :

Perfect! Thanks for making another profile.

@RubAnADUB

PLA - works as expected, slid down slow but locked into place just fine. No issues nice and tight / perfect fit. Thank you for the model!

The designer has replied

@andyschettini

That’s good to know. I still have the first ones that i made of my model and I made them with PLA too. I recommend always to other people to print this model with PETG because they was not having the same luck as us. Thanks for the photos😁

@shay.m.mail

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@andyschettini

Looks so good!

@user_688415938

Print Profile

0.2mm layer, 2 walls, 15% infill

design is great. concept is perfect but I wouldn’t suggest printing with PLA. use something stronger. PETG might be good. the hooks snapped off on 2 of them before I could put a roll on and I removed the third one I had in advance of it falling off the wall.

The designer has replied

@andyschettini

Yeah that’s why I write that on the description, PLA is very fragile and can break very easy. PETG is perfect for this model

@user_688415938

Replying to @andyschettini :

you’re correct. you did mention that. I’m just a guy who didn’t read that. my mistake.

@andyschettini

Replying to @user_688415938 :

Haha don’t worry. btw, I did mine on PLA the ones of the photo and they still up. but that’s maybe just lucky 😂

@themaker_

Print Profile

0.2mm layer, 2 walls, 15% infill

@GoldenSilence

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:Sorry but not a good model. I printed it in PETG but it broke almost immediately. The four legs should be thicker and longer. A modifier making them higher infill might also help.