Glaceon The Tundra Guardian - Eeveelutions 9 of 9

Last one is DONE! WOOOT  :)  hope you guys like them, it was a blast making them over the past couple weeks.

Project: Tundra Guardian Glaceon.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #0a2989 PLA #BambuLab Basic Blue  Transmission Distance: 2.2
    #0078bf PLA #BambuLab Matte Marine Blue  Transmission Distance: 2
    #9b9ea0 PLA #BambuLab Matte Ash Gray  Transmission Distance: 1
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 1.8
    #8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #9 (0.8mm) swap to #BambuLab Basic Blue
    At layer #11 (0.96mm) swap to #BambuLab Matte Marine Blue
    At layer #13 (1.12mm) swap to #BambuLab Matte Ash Gray
    At layer #14 (1.2mm) swap to BambuLab Basic Cyan
    At layer #17 (1.44mm) swap to BambuLab Matte Ice Blue
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.