Dollhouse Clothes Rack / Coat Rack - 1:8 Scale by fijter

fijter

Miniatures>Other Miniatures

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

47 min

1 plate

4.6(38)

Open in Bambu Studio

Boost

156

381

455

317

Released

Description

This is a quick and easy-to-print clothes rack with hangers (no supports, skirts, or brims needed but make sure your heatbed is clean for good adhesion!). You can easily fit it together and it will hold fine, gluing is optional. It is inspired by other clothing racks like the IKEA Turbo, but specifically designed to be easily 3D printed keeping steep overhangs and enough surface area in mind for bed adhesion.

This rack is made for the 1:8 / 1:6 scale, perfect for Barbie or Blythe doll clothes.

Comment & Rating (46)

@user_3235587759

Print Profile

0.2mm layer, 2 walls, 15% infill

What a clever and fun design. chef's kiss.

The designer has replied

@fijter

Thanks for the kind words and sharing a pic :)

@nteatough

Was easy to make. Made a 65% size for a Chelsea doll.

The designer has replied

@fijter

Thanks for sharing! Great to see it works at that scale too given the small size of the pegs for the top bar 😅👍

@iStijn

Print Profile

0.2mm layer, 2 walls, 15% infill

Yet again another amazing 3D model, looks amazing and fits like a glove even without using glue!

@68Fastback

Print Profile

0.2mm layer, 2 walls, 15% infill

had problems with the top bar pulling up from the build plate on multiple tries. slowed it down to 50% and increased build plate temp. finally got it to finish but filament was separating.

@Pinball_JRK

Print Profile

0.2mm layer, 2 walls, 15% infill

The connections fit well enough, but may need a spot of glue if the rack will be handled. Great model. The sweater in the picture is a tree ornament that is not scaled to fit a Barbie doll.

@Criminal_DM

Boosted

the print turns to spaghetti a bit over half way through. not sure what's causing it.

@TheKirklands

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

All the parts printed without issue and went together easily. I used up remnants from some gradient filament to get different colours. It looks adorable!

@SnosageBeefTips

Print Profile

0.2mm layer, 2 walls, 15% infill

petg-hf and extra hangers

@Mikurie

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print. I wanted one a little longer. It would be great if a few different lengths were provided. for the horizontal rods.

(Edited)

@c2bb50

I tried printing this twice on 2 Bambu Printers - P1P. Neither of them would print the top of the piece correctly. It would just make spaghetti on the part that is supposed to fit inside the side supports, so I had to superglue it on. My plate was very clean and I had no problems with it sticking, I even tried changing the rotation of the top piece, but it still wouldn't print correctly.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Miniature Dollhouse Scale 1:12 Table and Chair

Print Profile(1)

Description

Comment & Rating (46)

License

Related Models

Miniature Dollhouse Scale 1:12 Table and Chair

Coat Rack

Coat Hanger

1/64th Scale Truck Tool Box