Wave Coaster Set Hueforge


Print Profile(4)

Thicker Frame Set_0.08mm layer, 2 walls, 100% infill
Thicker Frame Set_0.08mm layer, 2 walls, 100% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A16.3 h
5.0
v2-01_0.08mm layer, 2 walls, 100% infill
v2-01_0.08mm layer, 2 walls, 100% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A12.3 h
3.5
v2-02_0.08mm layer, 2 walls, 100% infill
v2-02_0.08mm layer, 2 walls, 100% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A12.3 h
v2-03_0.08mm layer, 2 walls, 100% infill
v2-03_0.08mm layer, 2 walls, 100% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A12.2 h

186
326
41
375
325
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Model

Dive into the mesmerizing world of waves with our latest Hueforge Coaster Set! 🌊🌀

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The files are available in STL and Bambu Lab 3MF file format.

 

Update, v2 Thicker Frame, 3 Colors version files are added.


Swap Instructions for 3 colors version:

Start with Blue

At layer #12 (1.04mm) swap to Light Blue

At layer #18 (1.52mm) swap to White for the rest.


Older Version;

Swap Instructions:
Start with Gray
At layer #7 (0.64mm) swap to Blue
At layer #12 (1.04mm) swap to Ice Blue
At layer #18 (1.52mm) swap to White for the rest.


License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Comment & Rating (41)

0/5000

Model Comment

Printed in dark blue instead of black/grey. I designed this coaster holder (a 6 and 12 versions) to use for Christmas presents.

4
Reply
Model Comment

These are great, I did a bit of a remix due to not having blue. Start Grey L7 Dark Grey L12 Gold L18 White

2
Reply
Set_0.08mm layer, 2 walls, 100% infill

came out great! I used a dark blue as the base because black looked a bit darker than I liked

The designer has replied
1
Reply

It definitely looks better with the dark blue!

0
Reply
Set_0.08mm layer, 2 walls, 100% infill

Super nice model, easy to print. My blue was a little bit off but that's on me 😂

The designer has replied
0
Reply

Thanks! They look great! I actually really liked your light blue! 😄

0
Reply
02_0.08mm layer, 2 walls, 100% infill

El modelo parece que va no va a salir bien al inicio, y va sorprendiendo mientras imprime, el resultado es brutal. Mis 10s.(Edited)

1
Reply
Thicker Frame Set_0.08mm layer, 2 walls, 100% infill

A beautiful print. I printed the 3 coasters first, then immediately hit reprint so i could have a set of six.

0
Reply
v2-01_0.08mm layer, 2 walls, 100% infill

Great design and great print but this one printed without the boarder for some reason. This didn’t happen on the other print profiles. Also, it doesn’t show in the picture but the white doesn’t seem to be thick enough. maybe my blue is a too dark or my white is cheap but it would be great if you could have some models with an extra layer or two of white. (Edited)

0
Reply
Set_0.08mm layer, 2 walls, 100% infill

Great file. Used a dark navy base and printed a total of 6 with the holder. Really loved how they turned out!

0
Reply
Set_0.08mm layer, 2 walls, 100% infill

amazing!

0
Reply
Set_0.08mm layer, 2 walls, 100% infill

First time we've done a hueforge print, and these came out amazing!!

0
Reply

Remixes (0)

There are no remixes yet