Print in Place Pop-up Catapult by Windrose

Windrose

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 25% arm infill, 15% frame infill

Designer

1.6 h

2 plates

4.9(127)

Open in Bambu Studio

Boost

408

854

162

119

1.3 k

1.1 k

Released

Description

This pop-up catapult prints in place, the only extra part needed is a rubber band. Though even if you don't have a rubber band, you can still launch manually!

Note: Before printing you may want to test your printer's tolerance for print in place hinges. To do that, you can use my Print in Place Tolerance Test model. By default, the catapults have 0.2mm of tolerance between separate parts.

You can print this in PLA or PETG.

When printing via the 3mf file, you should import it into Bambu Studio as a single object having multiple parts. I would recommend at least 25% infill on the arm, 15% for everything else is fine.

Colors in photo examples:

Prusament PETG - Prusa Orange
Overture PLA - Purple

Comment & Rating (162)

@appa.

favorite model so far absolutely amazing

@3DELWORLD

amazing design to print👍 This video will help you to see the function of this model: https://youtu.be/PUCHOymgznI

@user_1447015019

Thanks so much for the video. It was very helpful.

@metalheadprinti

I'm responsible for the people in the QA office at work not getting anything done because of these and I'm cool with it. 😜 Thanks for the awesome model!