Better PTFE Chain Clips for Bambu Labs P1P,P1S,X1C

Better PTFE Chain Clips for Bambu Labs P1P,P1S,X1C

Boost
242
528
171

Print Profile(3)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
4.8(110)

0.2mm layer, 3 walls, 25% infill
0.2mm layer, 3 walls, 25% infill
15 min
1 plate
4.8(40)

ABS - 0.2mm layer, 2 walls, 15% infill
ABS - 0.2mm layer, 2 walls, 15% infill
13 min
1 plate
4.9(10)

Boost
242
528
171
11
1.2 k
769
Released

Description

Your PTFE Clips just got better.

3 grams of material, 14 minutes of print time, try it out! *Use PETG or greater.

 

Update 3/15/2024: 

If you attempt using similar Tool Head PTFE Guide like this one by @AdamL

You may try skip the 3rd clip and relocate other two clips as the picture shows.

 

Have you ever realized that you shouldn't force the PTFE tube into a fixed position?

The curve of the PTFE tube constantly changes as the toolhead moves from corner to corner. Just follow the curve!

 

With three different clip shapes, each designed for a specific position. The PTFE tube can now move more freely inside the clips, with only necessary restrictions and no unnecessary forces.

 

仔细观察,工具头移动时,PTFE 进料管的形状会一直变化,并不是完全贴合链条,使用三种不同形状的固定夹可以使得进料管受限的移动,与此同时又不会使其受到太多强制的力。

Comment & Rating (171)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
seems good
0
Reply
Print Profile
ABS - 0.2mm layer, 2 walls, 15% infill
perfect!
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
non si attaccavano
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
Nice design.
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
Fantastic! no more hearing thr tube bang against the glass. also printed and used the PTFE guide. worked like a charm
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Easy print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Thanks for it
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
fast and easy to print, very useful
0
Reply
Print Profile
ABS - 0.2mm layer, 2 walls, 15% infill
had to move the stock Bambu clip but after that, it works perfectly. even using it with a pergola redirecter going into the print head.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed perfect and really quick.
0
Reply