Round Birdhouse

Copyright Claim

Round Birdhouse

Boost
243
408
69

Print Profile(3)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini

PETG 0.28mm layer, 3 walls, 15% infill
PETG 0.28mm layer, 3 walls, 15% infill
Designer
5.3 h
3 plates
4.9(44)

Dynamic Layer High, 3 walls, 15% infill, PLA+
Dynamic Layer High, 3 walls, 15% infill, PLA+
5.4 h
3 plates
4.7(3)

A1 Mini, 0.28mm layer, 3 walls, 15% infill
A1 Mini, 0.28mm layer, 3 walls, 15% infill
6.8 h
3 plates

Open in Bambu Studio
Boost
243
408
69
42
455
343
Released

Description

A simple and elegant modern birdhouse. Very easy to print and requires no supports. Snap together fittings for easy assembly. Can be used with or without a perch. Try using fuzzy skin on the body for a very nice look. Recommend using PETG.

 

- Assembly Tip: Press the faceplate into the body on its edge to get it to fit inside, then line up the indents for a snap fit.

 

Boost Me (for free)

Thanks for the support!

Comment & Rating (69)

Please fill in your opinion
(0/5000)

I really like the design and how it printed but I really have trouble getting the face plate inside the body. It is very firm. It seems like the faceplate is much bigger that the opening in the base. Do you have any tips? edit: I put a lot of pressure of it and it fits! I was really afraid it would break but it didn't.
(Edited)
The designer has replied
0
Reply
Looks like you put the perch on the inside instead of the outside.
0
Reply
You have to slide the faceplate in on its edge, the body will bend a bit to allow it to pass with a little force. Nice print.
(Edited)
0
Reply
I added a small feeder to attract birds, surface imperfections are due to my material. Printed in ABS. Thank you very much for the model
Show original
2
Reply
Printed nicely enough on a A1 mini in a touch over 4 hours using my own profile. Used fuzzy skin.
2
Reply
Print Profile
PETG 0.28mm layer, 3 walls, 15% infill
super good
1
Reply
The print profile is no longer public
The designer has replied
2
Reply
Which filaments did you use? They are truly beautiful!
Show original
0
Reply
Boosted
Print Profile
Dynamic Layer High, 3 walls, 15% infill, PLA+
nice easy print
1
Reply
Print Profile
Dynamic Layer High, 3 walls, 15% infill, PLA+
Model had a little stringing but otherwise printed perfectly!
1
Reply
printed in PLA . same problems with stringing on the lip like other people here but the result ist perfect 👍🏻
1
Reply
Print Profile
PETG 0.28mm layer, 3 walls, 15% infill
Little overhang issue but printed really nicely otherwise!
(Edited)
1
Reply
Cute!
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.