Collapsible Lightsaber Nunchucks!!! by lukeinthegarage

lukeinthegarage

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

11.2 h

3 plates

4.8(26)

Open in Bambu Studio

Boost

253

366

371

273

Released

Description

Unleash the Fury of the Force (and Nunchuck Fury Too!)

Ever dreamt of channeling your inner Bruce Lee and Jedi Master in one epic go? Look no further than these 3D-printable lightsaber nunchucks!

Inspired by a meme that was as brilliant as it was silly, these bad boys are:

Easy to print: No need to be a droid engineer, just fire up your 3D printer and get ready to unleash your inner Jedi (or nunchuck master).
Collapsible: Safety first! These nunchucks collapse for easy storage and, well, not accidentally slicing your furniture (or yourself!).
Free to download: May the downloads be with you! Share the fun with your friends and become the ultimate meme-ing, lightsaber-wielding, nunchuck-swinging legend.

Disclaimer: While these nunchucks are inspired by lightsabers, please remember they are for printing and admiring only. No harm should come to droids, furniture, or loved ones (unless it's from laughter-induced tears).

So grab your favorite filament, channel your inner meme lord, and get printing!

Printing Notes: I printed mine with a .4mm nozzle at .2 layer height and only used an outside brim on the chain.

Comment & Rating (41)

@Michael.herling

print was perfect right off the bat. so much fun. great design if you break off the light saver portion can easily be reprinted and replaced.

The designer has replied

@lukeinthegarage

SO AWESOME!!! WEll done

@voltronwanted

Print Profile

0.2mm layer, 2 walls, 15% infill

nice!

@lukeinthegarage

woah nice work

@tania_made_

Print Profile

0.2mm layer, 2 walls, 15% infill

awesome saberchucks my nephew loved them and they printed grate on my A1 I had to slow down the tall prints around 70% but that’s the only thing I needed to mess with

@lukeinthegarage

sick

@standitupstore

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

huge Bruce Lee fan so these where so fun to print .

@user_1895409113

hello, I get this issue on the top of my chains. idk what it's called, warping? The bottom is fine, is this normal because there's no support or do I need to dial in my printer? Also, do you think these chains are good for swinging the nunchucks FAST? I removed the lightsabers and just want to get good with nunchucks but I'm scared of a chain breaking and flying into my monitor or drywall lol.

(Edited)

The designer has replied

@lukeinthegarage

haha If you're having issues with the chain slow it down. No promises on the drywall.

@Broder139

Print Profile

0.2mm layer, 2 walls, 15% infill

awesomeness!

(Edited)

@ColemanDesigns

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

These ligh saber nunchucks are top notch! Easy well made print and it's pretty fun to play with too!

@tj66stang

Boosted

These turned out much better than expected! love them!

@Pogolito64

Print Profile

0.2mm layer, 2 walls, 15% infill

My print did not work perfectly, but the result is excellent. The black sticks detached from the plate at the end.

Show original

@the_commander

Print Profile

0.2mm layer, 2 walls, 15% infill

The nunchucks are amazing but if you don't also print the lightsaber pieces then it is a little off balance

@lukeinthegarage

What do you mean?

@the_commander

Replying to @lukeinthegarage :

so I didn’t print them with the lightsaber part which I think would make them heavier on the handle but because I didn’t print them, the screw on part weighs more then the handle.