Metric screw and nut gauge card with protractor by Halfway_Engineered

Halfway_Engineered

Tools>Measure Tools

Print Profile(7)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

AMS 2 color 0.2mm layer, 2 walls, 15% infill

Designer

28 min

1 plate

4.8(20)

One color no AMS 0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(6)

No AMS manual color change 0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(3)

Nice Surface | Ironing | 0.2mm layer, 2 walls, 15% infill

43 min

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

490

948

1.4 k

1 k

Released

Description

This credit card sized tool allows for measuring of metric screws and nuts, and includes a built in protractor. Additionally, the four corners are marked for filet radiuses between 1 and 4mm.

Print the top 0.4mm in a second color if you would like contrasting labels.

Pairs nicely with a US imperial screw gauge

If this design is helpful to you, consider checking out my other free models

Boost Me (for free)

Please consider boosting if this model was helpful for you!

Comment & Rating (47)

@cyclismo

I was looking forward to this but was concerned when my print was skewed after the manual color change. I’ve done manual color changes before without this problem. I’ll add a photo. I’m doing this on a P1S. Please let me know if you have any idea why it may be happening

The designer has replied

@cyclismo

I ran the same project, the one with no AMS and manual filament change. When the pause happened I just pressed continue. Do you think this a problem with my P1S?

@cyclismo

Replying to @cyclismo :

Just as another case, I printed the Imperial project, no AMS, and manual filament change. Yellow for the base and blue for the finishing layers and there was no skewing, so it doesn’t seem to be my P1S.

@Half_Engineered

Appears to be a problem when using the "load" and "unload" commands based on what I see in the forums. One workaround is adding "G28 XY" to the pause g-code to force homing after swap. This is not something I encountered on my end, but I will update the print profiles when I have the chance. Thank you for providing detailed troubleshooting pictures.

(Edited)

@shockelemental

Model is missing one marker. Otherwise its awesome.

The designer has replied

@Half_Engineered

Good eye! Thanks for letting me know. The stl file and print profiles have all been updated.

@codemania

R U sure there is such a problem？it Seems that this problem on line up in your picture。Otherone’s prints r all perfect。

@user_777807824

Perfect! But why do I keep getting this extra rectangle with almost every print? I’m using the A1 mini with AMS. And more important, how can I prevent this?

The designer has replied

@Half_Engineered

That's the purge tower that allows the nozzle pressure to stabilize between filament swaps. It can be disabled in the slicer at the cost of print quality.