If you ride agressive, print the vertical orientation profile. This will print the layers vertical opposed to horizontal.  When you're riding on trails or jumping, there is a tremendous amount of upwards pressure on the model. This orientation should prevent failure of the layers breaking apart.

For casual riders, print the standard horizontal orientation. This prints in 2 parts and has a much cleaner finished look.

Please note: For the horizonal profile, if you don't print the BOTTOM PART, the TOP PART will not fit correctly by itself! The two must be used together for a perfect fit.

Print in PETG for best strength and results. Do not use PLA.

Add-On Prints:

• Fins here
• Shield here