[Sep.1] Poop Chute & Basket/Outlet for X1C/P1S/P1P by TrocheHoleMakerWorld: Download Free 3D Models

TrocheHole

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

H2D

(Official) All parts on each plate - 0.16mm layer, 3 walls

Designer

82 h

19 plates

4.9(3.3 k)

[6x3 Magnets, One Plate]: 0.16mm layer, 3 walls, 15% infill

19.1 h

4 plates

4.9(303)

X1C, 6x2 magnets and Large Basket, Smooth Timelapse

13.7 h

2 plates

4.9(46)

0.2mm layer, 2 walls, 15% infill, speed up, longversion,

6 h

3 plates

4.9(33)

Click to see more

Open in Bambu Studio

Boost

5059

11223

4285

4.3 k

27.1 k

18.7 k

Released

Description

The magnetic Chute with detachable Baskets or an Outlet for the poop purged from the Bambu Lab X1/P1 series.

The Chute, Basket, and Outlet are all easily detachable, yet securely attached to prevent accidental movement.

The use of the Fixture (the light gray part in the photo) is strongly recommended, as it is very effective in preventing the Chute from shifting.

Please also check the photos and print profile for additional information.

Boost Me (for free)

If you like this design, your free Boost would really help me create more designs!

Update History

[ September 1, 2024 ]

The “Outlet” has been newly added as an optional upgrade for the Poop Chute & Basket system.

It is designed to handle larger volumes of purge, replacing the basket and directing purge into a larger container.

[ June 14, 2024 ]

“Fixture2”, which allows stable installation of the Chute without magnets, has been added.
(*It can also be used with magnets.)
As requested, the “Extra-Short” size basket has been added.

[ April 7, 2024 ]

New sizes have been added to the basket model.

Printing Tips

No supports are needed. But, the overhang angles of the Chute and Basket are 30 degrees.

If you are using a filament that is NOT good at printing overhangs, please enable support settings yourself.

Compatible Magnet Types (for the Chute)

DIA 13mm x T 2.5mm
DIA 12mm x T 3mm
DIA 12mm x T 2mm
DIA 10mm x T 3mm
DIA 10mm x T 2mm
DIA 8mm x T 3mm
DIA 8mm x T 2mm
DIA 6mm x T 3mm
DIA 6mm x T 2mm
No Magnets

Bill of Materials

Maker’s Supply Kits and Parts

Official Certified

M3x12 SHCS Machine Screw (20PCS) - AA038

B-AA038

1.18 USD

× 1

D12x3 mm Round Magnet (20PCS) - CA010

B-CA010

3.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (4285)

@airshark

Boosted

Bambu should license this from you and include it as standard. Really appreciate your efforts here! This is a perfect accessory for my X1C.

@saygvin

Boosted

Print Profile

(Official) All parts on each plate - 0.16mm layer, 3 walls

I'm in awe with how beautiful these look and feel. Printed medium size box with Prusament PLA Galactic Black Thanks for a great model

@Cor83

That PLA looks really beautiful, almost seems to be carbon fiber PLA.

@Liewan

Boosted

Print Profile

(Official) All parts on each plate - 0.16mm layer, 3 walls

smooth

@user_3361654447

This looks amazing What settings and filament did you use 👍🏻👍🏻👍🏻

Show original

@djchrishart

Wow, that color looks just like the Bambu case itself! What filament type and color did you use?

@Cor83

I printed the ramp yesterday, using the included parameters in the 3mf file, which came out great with PETG. But printing the basket is messed up 3 times already. Problem always returns on the verry same corner. No matter how I slice or turn the object. it seems to be a problem with acceleration after slowing down on the slope, and then immediately accelerate. I'm printing on a stock P1S, with PETG on the standard Generic PTFE preset. PS. the rest of the print is just great and almost perfect. It's only this verry same corner which gets messed up over and over again...

(Edited)

The designer has replied

@TrocheHole

Enabling support settings might help.

@vale_1041

Boosted

This was happening to me too. Definitely a problem in the object's design, but I'm not sure what exactly causes it. I was able to fix it by moving the part in front of the aux. fan set to 80%, changed the overhang speeds, and removed the lid and opened the door. This was in PLA, so you might have different results with PETG.

@Cor83

Replying to @vale_1041 :

This looks pretty similar to mine yes, however I think mine was verry extreme. Might have been the use of PETG. But to me it looks like a combination of problems. - the generated seam position, maybe in combination with the acceleration. - heat issues. I tried several prints already and the smallest basket actually came out pretty decent, while the ramp is exactly the same. Only the ramps on the other models came out like this. So because of that I think it's something with how the GCODE is generated. I also tried cutting off the ramp of one of the bigger models in Bambu Slicer to safe filament for testing purposes. And by doing so the ramp alone came out perfectly. So I'm sure it has not much to do with speed, support etc. And that it seems to something in the slicing. I also tried rotating the design a few times. The rest of the prints always came out superclean. But everytime had the same issue on the verry same corner. I actually gave up onto it for now... Just wasting a lot of filament on this one.

@user_4162096512

Boosted

Print Profile

(Official) All parts on each plate - 0.16mm layer, 3 walls

i am really impressed, fits great and catch all the poop.it should be in the sd with the printer.

@KingOcho

Print Profile

(Official) All parts on each plate - 0.16mm layer, 3 walls

Fantastic! This was my first functional print for my P1S and it came out better than I could have possibly hoped!

@eBuster

Added hole to mount it more secure, because of magnets doesn't feel safe. I think it can be added by design (with small pop to fit printer hole shape, like in the BAC model). And probably then we also don't need the heel to stay on the table. Additionally the base part of model can be secured by some kind of hook under printer case corner, and it should allow to get rid of magnets completely.

@TheTallTom

Do you perhaps have the template for that? I would also like to screw it together

Show original

@karigon

Print Profile

(Official) All parts on each plate - 0.16mm layer, 3 walls

Excellent design and printed with default settings without any issue. As I have 4x2mm magnets instead, I printed my own adapter to convert it to 6x2mm and it fits perfectly. Must have mod.

@CptChappie

Print Profile

Save material - 6x3 magnets, medium box, 2 walls, 5% infill

seems to be a lot of reverb around holes print height. Also half way through the bottom part of the print seems to be a print line defect. don’t know if that’s caused by the speed of the print. I used whatever profile cam with the model / slice settings

The profile uploader has replied

@TheSoumilArora

Boosted

Seems to be a print issue, because I printed it myself and a dozen other people have printed with this profile and came across no such issue. What I can diagnose from this picture is maybe the nozzle hit something during the print, which caused it to skip steps and then the printer re-homed itself without pausing (which it does!), which led to this minor defect in the z-axis. Did you try printing it again?

@user_2498358712

I experienced the exact same issue printing with PLA + Sunlu at sports speed, the parts separating in two at the exact same spot 😭

Show original

@J1dub

Print Profile

(Official) All parts on each plate - 0.16mm layer, 3 walls

works great 👍

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.