"The Magic Y Splitter": The FDM 3D Printing Challenge “Y Splitter Without Quick Connectors”

Designed for use with Teflon tubing for bamboo expansion (inner diameter 2.5mm, outer diameter 4mm)

Are you ready for a unique 3D printing challenge? We've carefully designed an FDM 3D printer accessory - the "Magic Y Splitter," specifically crafted for Teflon tubes. Its defining characteristic is the complete absence of quick connectors! That's right. This ingeniously designed accessory cleverly utilizes subtle gap differences and friction, not only streamlining the installation process but also significantly enhancing the printing experience. Furthermore, it serves as an exceptional tool for evaluating the precision of your printer. It's worth noting that this printed piece weighs just 2.7 grams, making it incredibly lightweight yet durable.

Simplified Installation Guide:

1. Setting Off: Initially, thread the Teflon tube through clamp A.
2. Skill and Ingenuity: Subsequently, thread the tube through the largest cylindrical print piece “L.” Kindly note, this cylindrical piece is not straight but is meticulously designed to accommodate the natural curvature of the Teflon tube, showcasing the ingenuity of the design.
   • If it fails to pass through, you may need to fine-tune your printer's settings, which typically indicates excessive extrusion.
3. Ensuring Stability: Following that, close clamp A. Once the tube reaches the bottom, rotate clamp A by 90 degrees. Similarly, thread through and close clamp B, rotating it by 90 degrees as well. With proper execution, the cylindrical print piece L should remain securely in place.
   • Should it still move, your printer might require further adjustments, possibly due to insufficient extrusion.
4. Fine Tuning: Gently cut along the middle of the cylindrical print piece L using a craft knife.
5. Finalizing Installation: Securely clamp the “protective board” print piece.

Congratulations! You have successfully installed the unique "Magic Y Splitter," not only adding to the printing experience but also refining your printer operation skills. Seize this fantastic opportunity to download the print files and tackle this creative challenge. Embrace the boundless joy and sense of accomplishment that comes with it! Moreover, its mere 2.7 grams weight makes it a light and enjoyable printing task. If your initial attempts fail, persevere; success signifies your victory in acquiring the "Magic Y Splitter" as a prize! "魔法Y分流器": FDM 3D 列印挑戰 “不需要快速接頭的y型管” 想不想來點不一樣的3D列印挑戰呢？我們精心設計了一款FDM 3D列印機配件——專為鐵氟龍管設計的「魔法Y分流器」，其最大的特點是完全不需要快速接頭！是的，您沒聽錯。這款設計巧妙運用了細微的間隙差異與摩擦力，不僅讓安裝過程變得簡單，同時也大大增加了趣味性。此外，它還是一款測試您列印機精度的絕佳工具。值得一提的是，這款列印件的重量只有2.7克，輕巧至極，卻不失堅固耐用。

簡明安裝指南：

1. **啟程：**首先，將鐵氟龍管穿過卡扣A。
2. **技巧與設計巧思：**接著，將管子穿過最大的管狀列印件L。請注意，這個管狀件並非筆直，而是專門設計來適配鐵氟龍管的自然彎曲，這正是設計的巧妙之處。
   • 如果穿不過去，可能需要對您的列印機進行微調，這通常表示出料量過多。
3. **確保固定：**然後，合上卡扣A，到底後將卡扣A轉90度，同樣方式穿過並合上卡扣B並轉90度。正確操作後，管狀列印件L應該固定不動。
   • 如果仍有移動，可能需要對您的列印機再次進行微調，這可能是因為出料量不足。
4. **精細調整：**使用小刀沿管狀列印件L的中間位置輕輕割開。
5. **完成安裝：**夾上保護板列印件。

完成！您現在已經成功安裝了這款獨特的「魔法Y分流器」，不僅增添了列印的樂趣，還提升了您操作列印機的技巧。這是一個絕佳的機會，讓我們一起下載列印檔案，挑戰這份創意與成就，體驗從中獲得的無窮樂趣吧！而且，它只有2.7克，輕巧易於列印。失敗再來一次，成功恭喜你得到「魔法分流器」這獎品！