Summary

When adding salt to the soft water salt port of the dishwasher, you need to remove the frame or pour it in at a 45-degree angle. But I am truly too lazy to get it and get some water, so I designed this model, which is also tilted. When adding liquid or something to the hole, it will easily spill out using a normal funnel, or simply cannot be used. Therefore, if necessary, you can print it out. If you wait until you need it, it may be too late. Of course, normal holes can also be used, but inclined ones are better.

At this angle, ordinary funnels are truly useless. I used to roll a funnel out of paper.

Top view, approximately 45 degrees.

The sides are almost horizontal and it doesn't take up much space when placed.

Side view, the specific size is adjusted according to the bottle mouth, such as the soft salt mouth of the dishwasher. In fact, it is more convenient to print it larger. I was anxious to see the printing effect, so I printed it at 100% size by default. It should be better to print at 150% size. .

When printing, the large opening points downward and no support is needed.

The dishwasher's soft water salt port requires removing the frame or pouring salt in at a 45-degree angle when adding salt. However, I am truly too lazy to get it and get some water. So I designed this model, which is also tilted. When adding liquid or something to the hole, it will easily spill out using a normal funnel, or simply cannot be used. Therefore, if necessary, you can print one out. If you wait until you need it, it may be too late. Of course, normal holes can also be used, but inclined ones are better.

This angle makes ordinary funnels truly useless. Previously, I used to roll a funnel out of paper.

Top view, approximately 45 degrees.

The sides are almost horizontal, and it doesn't take up much space when placed.

Side view, the specific size is adjusted according to the bottle mouth, such as the soft salt mouth of the dishwasher. In fact, it is more convenient to print it larger. I was anxious to see the printing effect, so I printed it at 100% size by default. It should be better to print at 150% size.

When printing, the large opening points downward, and no support is needed.