INTEX Water Circulation Improved Water Quality by 3D_Den

3D_Den

Household>Garden

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 5 walls, 25% infill

Designer

6.5 h

1 plate

4.8(20)

Open in Bambu Studio

Boost

177

209

120

Released

Description

An Intex pool is a great way to relax and cool off on hot summer days. However, to keep the pool water clear and clean, regular cleaning and maintenance is essential. An important component of the cleaning process is the water flow, which circulates the pool water through the filter and pump and removes impurities.

One way to improve underwater flow and optimize the cleaning process is to use my design. This device is attached to the outlet of the pool and uses the water inflow to remove impurities such as leaves, insects and dirt particles from the water surface.

INFORMATIONS:
The version in the files is not the identical one as in the pictures, it is a smaller and optimized version

3D PRINTING SETTINGS

circulation filtration

circulation

Comment & Rating (29)

@XenonX

Print Profile

0.2mm layer, 5 walls, 25% infill

ottima idea

@keribin.yoann

Hello, compatible with ultra xtr intex?

The designer has replied

@3D_Den

Can you send me the dimensions of the outlet?

@keribin.yoann

Replying to @3D_Den :

I see it tomorrow ! :)

@keribin.yoann

Replying to @3D_Den :

It's 38mm outlet and there's a 32 version too :)

@snowgoon360

Print Profile

0.2mm layer, 5 walls, 25% infill

Works great after some small tweaks for my Intex pool.

@indy16mm

Thank you for the model. But it is a little bit smaller than the Intex outlet. It might be better if it's designed with screw for original Intex part.

@snowgoon360

So I printed mine at 105% scale. That worked well for my intex pool. Do a test print with only the port so you can test fit first.

@OneRodz

Can explain how this really work?

@Mymaxdom

Boosted

Print Profile

0.2mm layer, 5 walls, 25% infill

Perfekt geworden vielen Dank

@g.cernec

Print Profile

0.2mm layer, 5 walls, 25% infill

Nice

@Soulnchain

What is the best way to print it? If I print it like in photo and use tree supports, they would be hard to remove from inside.

@user_3243051327

Really cool! Nice work🤙

@blue_oblivion

Print Profile

0.2mm layer, 5 walls, 25% infill

nice

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (29)

License

Related Models

Watering Can for Plants

Water Lily Bowl

Water fountain

gekko water bowl