[3DP RNS] Hexnake_V1.0 by 3DP RNS

3DP RNS

Toys & Games>Characters

IP Report

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

1 plate

4.6(241)

A1mini 0.2mm layer, 2 walls, 15% infill

2.1 h

1 plate

4.3(53)

GYORID infill 0.2mm layer, 2 walls, 10% infill

3.1 h

1 plate

4.4(5)

0.2mm layer, 2 walls, 15% infill

2.2 h

1 plate

3.7(7)

Open in Bambu Studio

Boost

1447

2361

689

149

4.5 k

2.9 k

Released

Description

★ New Robot Unveiled!

[3DP RNS] Hexnake V1.0 (3D Printed Robot)

Series : 0 Legs / Snake Type
This Is an all at once print. Assembly not required :)
If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
Thank you for your subscribing! It means a lot to me :)
Commercial License [Patreon]

※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim.
If removing Brim is inconvenient or challenging, I don't recommend printing it.
Also, joint functionality may vary depending on the printer and filament you use.
I hope your print is successful and you can have a robot with well-functioning joints.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Swift & Stand V1.0 (3D Printed Robot)

[3DP RNS] Swift & Stand V1.0 Download [Patreon]
Swift & Stand V1.0 can be obtained through Patreon (Hero) membership.
It is an autonomous flying robot with four propellers.It moves swiftly, quietly, and is used for reconnaissance purposes.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Sentinel Turret V1.0 (3D Printed Robot)

[3DP RNS] Sentinel Turret V1.0 Download [Patreon]
Sentinel Turret V1.0 can be obtained through Patreon (Hero) membership.
This turret-type robot defends the base with missiles, featuring 360-degree horizontal and 90-degree vertical rotation of its missile pods.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Albatross V1.0 (3D Printed Robot)

[3DP RNS] Albatross V1.0 Download [Patreon]
Albatross V1.0 can be obtained through Patreon (Hero) membership.
This robot takes the form of an airplane drone. It plays a crucial role in swiftly flying at high altitudes to share information.

Comment & Rating (689)

@NateSemiPr0

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

worked very well! it did break at one part while I was trying to get it loose. but it’s because I used PLA. but other than that it is so cool! thanks!

@3DPRNS

You left two comments. That must mean you like this robot, right? I hope you try printing with other robots as well. And I hope there are no issues with your printing. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@mscbusn

New rating. previous were not mine. My print was not successful. I could not articulate the snake at all. The bottom layer was not smooth. I could not cut off the material on the bottom or between different parts. I am new to this. What settings should I use? The snake is black because we have black snakes in this area of North Carolina.

@NateSemiPr0

Replying to @mscbusn :

man. there is a lot going on there. not sure what machine you are printing with, but you’ll need to fix a bunch of issues with your printer before printing something like this. level bed, adjust z-axis, adjust the e-steps. etc. I’d start with this first.

@3DPRNS

What is next? Don't forget to subscribe to my YouTube channel :)

@reactorjam8

Boosted

motor bike also I love your models

@KlemK

Print Profile

A1mini 0.2mm layer, 2 walls, 15% infill

This a great print.

@3DPRNS

Perfect! The colors are striking and impressive. The photo of the robots gathered at the base is really cool. Thank you for the photo, comment, and printing!

@user_1101920104

the first layer clumped up and had to cancel print

@user_3360832865

Boosted

what filament did you use?????

@Exxor

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

came out pretty good

@3DPRNS

Your robot has been nicely printed in black. Well done! Thanks for the picture, comment, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@user_2061008143

Printed perfectly. All joints work, no breaking.

The designer has replied

@3DPRNS

Thanks for the picture, comment, and printing! I'm pleased that your printing turned out well. The colors also match the image I uploaded. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@user_3360832865

Boosted

What fillament did you use

(Edited)

@Uranio3D

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Took chance and printed with no brim and it came out awesome. After carefully breaking the stiffness it is smooth but still holds its position. My son's favorite snake so far. Now to give the scorpion a try and see how that comes out.

@3DPRNS

Thank you for the picture and comment. Looking at the photos, it seems that the robot printing turned out well. The robot joints also appear to be functioning smoothly. I'm glad to hear that your kids like the robot; that brings me joy too. I hope the scorpion robot also prints and operates without any issues. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@Daniel_D

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Great print! Slightky looser than I thought it would be, but that’s probably because I scaled it up a bit. Still amazing and would highly recommend! This one is in Bambu sparkly red PLA on a textured PEI Plate on the X1C.

@3DPRNS

It printed beautifully in red! It looks amazing! Thank you for sharing your detailed printing experience in the comments. I appreciate you keeping the pictures, comment, and printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@Daniel_D

Replying to @3DPRNS :

subscribed!

@Kaminu

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

good print but dificult to break the links

@3DPRNS

Making the robot's joints move well is a bit challenging. You did an excellent job with that. Well done! Thanks for the photo, comment, print, and boost! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@huskyryan

Boosted

Great print

The designer has replied

@3DPRNS

Your robot is perfect in terms of color, printing, and joints. Well done! Thank you for the photos, comments, printing, and the boost! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@LuckyMtnMan

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Really cool. My son is going to love it.

@3DPRNS

Your robot prints perfectly. The joints look fine too. Great job! Thanks for the photo, comment, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License