Great solution for a common Problem. Printed in Orange PETG, fits so much more secure than the original ones. Finally no worries when washing the car with a pressure-washer :-)

Ezerus

kevnaab

PETG 0.16mm layer, 2 walls, 60% infill

hoodlum

user_1503249611

Linha d’art

Herol

cover

Untitled2_ab5a7abd-4a56-4fde-a6ae-f0421e9510c4.png

423619639_369680135852902_8117633197503094267_n_31461a08-8cb4-4178-8ffd-bf031c2dfb8f.jpg

Untitled_59750a6f-dc36-4b92-852b-72429da0a831.webp

423619639_369680135852902_8117633197503094267_n_f2e4f953-5fa1-4bff-ba87-56ff56be089e.webp

plate_1.png

- I recommend from ASA, because of the UV stability! I only had PETG available, so the print profile is on PETG. ABS may also be sufficient. - I do not recommend PLA - it is not UV stable and it will twist - Requires support for tha latch and rails. The supports at the arrow and roughing have been canceled - bridge printing. It is possible to return them, but they are difficult to remove, or do not remove them and you will be left with a smooth, continuous

This cover solves the notorious problem of Suzuki Swift owners - roof bar covers falling off. This is a hard to find part. It sits firmly, so there is no risk of further falling out. I recommend printing as soon as possible so it doesn't leak through your roof.

Suzuki Swift roof bars cover

ASIA

Print Profile(1)

Description

Comment & Rating (5)

License

Related Models

Vise Cover - TPU 90A/95A

Ergonomic Handle for Bags

Toilet Seat Pad Handle

Ceiling vent partial cover / deflector