Phone Stand "Rolled" (No AMS Needed)

Copyright Claim

Phone Stand "Rolled" (No AMS Needed)

Boost
85
92
15

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 8% infill
0.2mm layer, 2 walls, 8% infill
Designer
2.1 h
2 plates
4.8(10)

0.12mm layer, 2 walls, 8% infill
0.12mm layer, 2 walls, 8% infill
Designer
4.1 h
2 plates
5.0(3)

Fuzzy Print: 0.2mm layer, 2 walls, 12% cubic infill
Fuzzy Print: 0.2mm layer, 2 walls, 12% cubic infill
2.6 h
2 plates
4.5(2)

Boost
85
92
15
0
342
218
Released

Description

Phone Stand - “Rolled”


Hi
I would like to introduce you to my Phone Stand - “Rolled” Looks as soft as foam.

I think phone stands are just great. They are easy and quick to print and you can never have enough of them :-)

You don't need an AMS for this one.

No Supports needed, print in place.

Just print all the parts, stick them together and you're done.

 

I used Bambu Lab PLA-CF Black for the print

 

If you like my work/project consider supporting me with these options:

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

Have fun printing

TBG

Comment & Rating (15)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 8% infill
Very useful model.
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
Prima. Sieht wirklich nach was aus und hält auch mein etwas dickeres ZFold 5 gut
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
Gedruckt in PLA, P1S Combo. Alles super, sehr sauber
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
only need to locate the rubber feet but other then that everything works and fits together. I just think my cellphone is too heavy for the base so it flips back easily. but still cool.
0
Reply
Print Profile
0.12mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
Fuzzy Print: 0.2mm layer, 2 walls, 12% cubic infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 8% infill
(Edited)
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.