Bambu Lab Tools and Accessories Box Remixed by 鷄翼

Remixed by

鷄翼

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

2.9 h

1 plate

4.8(129)

V2 - PETG

Designer

2.9 h

1 plate

4.9(40)

Open in Bambu Studio

Boost

441

1073

199

116

2.1 k

949

Released

Description

24.02.2024 update：New Version of the insert box

-Adjusted the positioning hole size of nozzle wipers
-Adjusted the shape and depth of the Allen wrench cutout

-Adjusted the hole size of mounting screws，just lightly screwed into the their holes and it will hold in place

This is a X1/P1 basic tools and accessories insert for filament swatches rugged box（https://makerworld.com/zh/models/87023#profileId-93692）

The following parts can be accommodated:

-Two hotends + two mounting screws

-Four nozzle wipers + two mounting screws

-Five filament cutter

-Nozzle pin

-Allen wrench

-Seven lubricant grease and thermal grease

Comment & Rating (199)

@MakerBreaker

Works good! A few areas where this could be improved: 1. The roller holes are too deep so when the lid is closed and the case is ratlled, the rollers get loose. The tolerance on the width of the holes could be tighter as well which may also help. 2. There should be a deeper cut out for the long allen wrench so you can better grab it. It's very hard to grab when seated in its spot. 3. The screws have to actually be lightly screwed into to their holes to stay put, not sure if this is intended design or not. They will rattle around in the case otherwise.

The designer has replied

@chicken19890802

Thanks for your suggestions for improvements，I have updated the new version model. New model adjusted the positioning hole size of nozzle wipers and the shape and depth of the Allen wrench cutout. Just as you guessed，the old model was designed to hold the mounting screws in place by screwing them into the holes，in the new model I adjusted the depth the screw needs to be screwed into the screw hole.

@MakerBreaker

Replying to @chicken19890802 :

Thanks for taking my suggestions. I made the new v2 and the rollers still come out of their holes and rattle around in the box. I think the hole depth needs to be shorter so the top of the rollers are closer to the top of the lid when closed. The small Allen wrench comes out of its slot as well in this version so the tolerances could be tighter or maybe a small lip could keep it snapped in place like the large wrench has. Thanks!

@KingOcho

Print Profile

0.2mm layer, 3 walls, 15% infill

FANTASTIC!

The designer has replied

@user_3763349769

How is the outer box printed? Are there any files available? Thanks

Show original

@chicken19890802

Replying to @user_3763349769 :

Didn't I include a link in the introduction? You can also click through to the section on secondary creation based on the following model

Show original

@user_3763349769

Replying to @chicken19890802 :

Thank you

Show original

@Hewstan

Boosted

Print Profile

V2 - PETG

all parts fit perfect, paired with the lid insert everything stays put when closed

@cletusbojangles

where did you get the print file for the lid insert?

@Hewstan

Boosted

Replying to @cletusbojangles :

https://makerworld.com/en/models/207762#profileId-458009 Here you go

Show original

@hawk

Boosted

Fits perfectly into the box, the various components that have been modeled also fit great. I'd like to see an option for complete hot ends - ones that have the wires already connected. Also I'd like a place to put the silicone socks. The print feels solid and overall it works well.

@user_2353431971

Print Profile

0.2mm layer, 3 walls, 15% infill

printed very nicely and fitted the case perfectly.

@user_3748550922

Truly superb for storage Prints well The craftsmanship and details are truly exceptional

Show original

@user_2877538490

Boosted

Thanks for the great ORIGIN model design. It was apart of several prints I found that expanded it a little, better meeting my needs. Appreciate the effort & creative design. 5*

@joshmm

Print Profile

0.2mm layer, 3 walls, 15% infill

This printed perfectly! No problems at all!

@cletusbojangles

Print Profile

V2 - PETG

love this, only issue is that my nozzle cleaning pin doesn't have the little black cap and doesn't fit all the way in the holder.

@cletusbojangles

love this print. I only ran into one issue. my nozzle pin is too long to fit in the holder and it also didn't come with that little black plastic cap.