Expansion Sets:

• Mine Cart Chase Marble Run now available for download!
• Christmas House expansion set 

_______________________________________

This is a set of building block models that allow creation of custom bases or dioramas with Minecraft theme. It comes with a customizer program for creating your own grids of varying sizes. Blocks are hollow and uses minimal amount of filament just enough to make the blocks rigid.

Build your own custom bases and dioramas for the Minecraft mini figure kits!

PRINTING

1. Print as oriented with no supports needed.
2. Printer must be calibrated to get the best fit out of the printed parts. You may need to adjust your bed adhesion to minimize elephant's foot (elephant foot compensation), nozzle temperature and flow rate. Too hot or too much molten filament extruded causes layers to be wider which will affect fitment of the parts.

IMPORTANT NOTE: Elephant's foot (first layer too squished into the build plate) may cause the blocks to be tight. DO NOT REMOVE assembled blocks right away. Wait at least a day and due to material creep, the blocks will get loose over time.

ASSEMBLY

1. Use the supplied plates of varying sizes as base to attach individual block pieces. You can also use the plates to connect/combine other plates to make bigger base plates.
   
2. Combine tiles and blocks of varying heights to make a whole block.
   
3. Print the same blocks and tiles using filaments of different types and colors to achieve a different look depending on the biome or terrain you're shooting for.
   
    
4. Combine blocks, tiles and plates to make trees.
   
    
5. Print individual blocks and tiles to make your custom base or generate your own grid by using the Customizer.
    

USING THE CUSTOMIZER

1. Below the profiles list, click the Customize button.
2. In the next dialog box that opens, select “Parts Grid Generator” and click Customize.
3. Inside the Customizer window,  modify the parameters in the left panel. See Settings table below for reference on what can be customized
4. Press the Generate button at the bottom of the left panel to preview your customized the design.
5. Once satisfied with your nozzle dimensions, click Download.
6. Import the downloaded STL file into your slicer, slice and print.