Desiccant holder, Silica Gel , Dry Box Accessory by kellytrinhMakerWorld: Download Free 3D Models

kellytrinh

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 35% infill

Designer

24 min

1 plate

4.8(28)

Profile for A1 mini, 0.2mm layer, 2 walls, 35% infill

25 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

107

292

267

Released

Description

Just a simple box to hold Desiccant / Silica Gels.

It's thin profile allows me to put this in 4L cereal containers where I store my open filament.

Keep your filament dry!

Note: Please use my print profile in order for the holes to appear. I have set it up so that the top and bottom shells are removed, and thus you will see the infill pattern (the holes) once you preview the slice.

This tip/trick allows me to build a simple design in freeCAD, and use Bambu Studio settings to get the desired hole patterns.

Comment & Rating (54)

@LucaBrossi

Print Profile

0.2mm layer, 2 walls, 35% infill

I used 3, glued to the anycubic filter for working with humidity in a small box

The profile uploader has replied

@kellytrinh

nice!!! thanks for the picture and rating!

@ChibbiBibi

ooooooooH GONNA TRY THIS

@dkontoulas

Print Profile

0.2mm layer, 2 walls, 35% infill

Came out great. I increased the size to 150% to use in my dry box. I also added a knob for the handle and a couple of nubs on the box to keep the lid from sliding open too easily.

The profile uploader has replied

@kellytrinh

you should definitely share your print profile! looks great!

@user_977580868

Boosted

This is exactly what I've been looking for. I just recently changed brand of silica gel and the beads are tiny. They fall through my current boxes! I just enlarged the box to 138% and the lid to 139% and it fits perfectly in my cereal container! (I might try the lid at 140%, but for now I just warped the lid a little by adding a slight curve at the middle with a torch and it fits snug. It doesn't affect the seal of the box.) Thank you so much.

The designer has replied

@kellytrinh

awesome!!!

@LinoRod

Print Profile

0.2mm layer, 2 walls, 35% infill

very small/thin & cover doesn't stay shut, but does print well

The profile uploader has replied

@kellytrinh

thanks for the comment and picture! for my printer it is a tight fit for the cover. Perhaps for your printer, you may want to increase the scale on just the cover by 1% or 2% to make it a bit tighter fit.

@kellytrinh

Print Profile

Profile for A1 mini, 0.2mm layer, 2 walls, 35% infill

thank you to whoever uploaded the a1 mini profile. I've printed it and it works great on my a1 mini. I'm the model designer and really appreciate that you did this for my model!