not quite as described but neat concept, partly own fault didn’t look close at image, and printed before realizing planet wasn’t as spherical as initially thought.

BDP1

All fills are "Archimedean chords"

This is a gadget I created when I first came into contact with 3D printing. At that time, my colleague asked me, "I like Saturn, can I make something in the shape of Saturn?" It seems a bit simple now. I plan to make some improvements to it, such as using black parts to connect the star rings to make the connection less obvious. Hope to hear your more detailed suggestions.thank you sincerely！

Aoaobear

cover

d1_07a1c0ca-cbb7-4d16-80a3-33a4f4ac66be.webp

d_ac347081-0f4e-4fd7-9677-d241f01006bc.webp

Base & Hanging ring

plate_1.png

Saturn 1

plate_2.png

Saturn 2

plate_3.png

微信图片_20240209000935_19ca5962-6983-4f7a-9959-6e19d64af676.webp

hanging ring can be embedded into the base

A simple night light in the shape of a Saturn.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176869/design/2024-02-08_892321eac2934.jpg"> 1. Glue is needed to bond the two hemispheres. 2. All fills are &#34;Archimedean chords&#34; (except the base part). 3. The connection between the planet and the star ring is very thin. It is recommended to use transparent or translucent PETG to make the lampshade part. 4.LED hole is 10mm. Depending on the size of your LED light source, you can adjust the size of this hole with bambu studio. 5. It is recommended to use spherical soft light LED, which should have the best effect. I used a 3W hemispherical LED.6. Two placement methods: use the base, or hang with a hook (the hook is adapted to 10mm LED base screws).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176869/design/2024-02-08_c3c6e18cac063.jpg"></figure>一个简单的土星造型小夜灯。 1.需要胶水来粘合两个半球。 2.所有的填充方式都是“阿基米德和弦”（基座部分除外）。 3.星球和星环的连接处非常细，建议使用透明或半透明的PETG来制作灯罩部分。 4.LED孔为10mm。根据您的LED光源尺寸，可以用bambu studio调整这个孔的大小。 5.建议使用圆球形的柔光LED，那样效果应该最好。（我使用了3W的半球型LED） 6.两种放置方式：使用底座，或者用挂钩悬挂（挂钩适配10mm的LED底座螺丝）。&nbsp;

A simple night light in the shape of Saturn.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176869/design/2024-02-08_892321eac2934.jpg"> 1. Glue is required to bond the two hemispheres. 2. All fills are "Archimedean chords" (excluding the base part). 3. **The connection between the planet and the star ring is exceedingly thin.** It is recommended to utilize transparent or translucent PETG to construct the lampshade component. 4. The LED hole measures 10mm. Depending on the dimensions of your LED light source, you can adjust the size of this aperture using Bambu Studio. 5. It is advisable to employ spherical soft light LEDs, which should yield the most favorable outcome. I personally utilized a 3W hemispherical LED.6. Two placement methods are available: utilize the base, or suspend it with a hook (the hook is designed to accommodate 10mm LED base screws).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176869/design/2024-02-08_c3c6e18cac063.jpg"></figure>

Saturn night light

Global

Print Profile(2)

Description

Comment & Rating (2)

License

Related Models

Lighter HSW

Illuminating Levitation Display

Ape Lighter Case

OK HAND LED LIGHT