3FT Christmas Grinch 0.16mm by AnthonyG11

AnthonyG11

Household>Festivities

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 3 walls, Varied infill

Designer

129.9 h

17 plates

4.6(9)

Multicolor 50% Scale

150.8 h

10 plates

4.7(6)

0.2mm layer,repaired

109 h

17 plates

4.8(4)

Open in Bambu Studio

Boost

182

305

669

159

Released

Description

This is a 3ft Grinch that my wife asked for, she thought I was kidding when I said I could :)

I've had several issues with this model as it came from a file that had been badly edited, I would link to it but I've done that much work to this that the original uploader I feel shouldn't have uploaded it.

Its along print that has many challenges to it including overhangs and supports to which there is plenty.

The hands you will need to create your own support structure as they can be printed in several orientations to optimise speed this also applies to the legs.

I would suggest using a brim on the bigger parts.

You will have some post processing to do this as the fittings were not ideal but they do work. If you want to make any edits feel fre as long as you share your work.

Most importantly enjoy :)

Comment & Rating (70)

@Jobop

Boosted

Print Profile

0.16mm layer, 3 walls, Varied infill

love this thank you a week and half project well worth the effort on the a1

The designer has replied

@AnthonyG11

Thank you for the kind words, glad you like it

@Jobop

Boosted

Replying to @AnthonyG11 :

do you think you could do max his dog I have looked for him but can't find him anywhere just thought would ask you

(Edited)

@AnthonyG11

Replying to @Jobop :

Sorry I didnt actually create this model originally. I just modified it to work in bigger scale. it had a lot of problems and I did what I could

@foxx1357

Finally finished spray painting.

The designer has replied

Show original

@foxx1357

On my side, the shoes fit well in the legs, but not in the body, I had to modify them, same for the arms. The hat needs to be lowered to 100 percent in the dimensions and not 103. After gluing and sanding, which I don’t enjoy doing.

Show original

@AnthonyG11

Replying to @foxx1357 :

Yes I also had to do a lot of modification to this model, just to get it to this stage. It was even worse, the legs were different sizes/lengths arms wouldnt even fit the peg holes let alone any where near lined up. the feet holes were to big and not deep enough as well.

@whytedevil

I made this weeks ago and loved it. I decided I had to find Max. I found him but was small and green. Using Bambu I painted it and finally got it printed.

The designer has replied

@AnthonyG11

Oh please do share your StL for max that would be awesome!! Great Job!

@user_994264474

yes please share ❤️

@whytedevil

Max can be found on my profile

@xChaisMcMariox

Boosted

Print Profile

0.16mm layer, 3 walls, Varied infill

Nice Model, made a multicolor remix of it

The designer has replied

@AnthonyG11

Looks great

@sevenlilbears2

thank you. i keep using yours as a guideline. how did you get the arms to attach i have a gap between the arm and the body. almost like it doesn’t seat all the way.

@xChaisMcMariox

Boosted

Replying to @sevenlilbears2 :

Check out my Profile, I´ve needed to remove these Square Pegs

@TheNeck

Boosted

came out amazing the smaller version, so i had to print the 3 ft version. AWESOME job, i too also had issues fitting the legs into the butt, and the arms into the torso, but it all worked out.

The designer has replied

@AnthonyG11

Fantastic :) Im so glad people are enjoying this and willing to put in a little more work. I put a lot in and a lot of filament just getting it to this stage :)

@AnthonyG11

Glad you like it :)

@fredjeanpierre

Hello. Thank you for sharing the model. I printed all the plates and started sanding. I have a question: I have a lot of misalignment between the pieces, for example between the head (plate 16) and the hat (plate 17), it seems that one piece is larger than the other. Could you also share how you fixed these fitting problems? Thank you

The designer has replied

Show original

@cannonfodder2k3

Boosted

The hat is scaled to 103%, I found this out after printing, I scaled back to 100% and reprinted it will now fit. Awaiting painting before I asemble the pieces will upload once complete.

@cannonfodder2k3

Boosted

Replying to @cannonfodder2k3 :

Loosely put together for quick picture

@fredjeanpierre

Replying to @cannonfodder2k3 :

Great thank you. Well, since I couldn't find it, I took my soldering iron and a sander to adjust everything, after a little putty and it should be fine, there's a lot of post-treatment anyway. If I am not satisfied with the result I will reprint.

(Edited)

@user_1426404186

Boosted

Just finished painting him. was lots of fun to do

The designer has replied

@AnthonyG11

glad you like it

@tommytom84

Print Profile

0.16mm layer, 3 walls, Varied infill

super teil

@Getsuga

Boosted

Print Profile

0.2mm layer,repaired

The arms and legs were still a bit uneven with gaps between the parts. though with a hot air gun and some playing around it all fit together super nice. I know how hard designing joint can be and that's why I'm not gonna lower my rating because end of the day this a great print!

@AnthonyG11

Please anyone who is going to download this use the 3rd download option as the kind gent has repaired many of the errors I could not. https://makerworld.com/en/@Rabauke1986 Deserves the credit for these repairs. Thank you.

The designer has replied