Remixed the original Feet Riser to mount with heat set inserts and countersunk M3 screws.

The Feet Riser is for the Anti-Vibration Feet from Bambu (https://eu.store.bambulab.com/products/anti-vibration-feet-for-p1p)

Because the feet are kinda wobbly, this part makes it easier to move the Printer around even with the wobbly anti-vibration feet.

The Riser comes in 4 Parts and you would need 2 heat set inserts (on the inner side of each part) and 2 M3x16 (M3x20 are better but will look out on the inside!) per Part

Total of 8 heat set inserts and 8 m3 Screws