Balloon Dog by steve_82

steve_82

Household>Decor

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

Improved Overhang Quality 0.2mm layer, 2 walls, 15% infill

Designer

2.6 h

1 plate

4.8(149)

Open in Bambu Studio

Boost

719

1110

206

106

2.1 k

1.6 k

Released

Description

A cute balloon dog :)

The profile is set to print at different speed especially for the tail and the nose area.

Enjoy

UPDATE

Added a profile for better overhang supports, especially for underbelly and face. Obviously the supports will be a bit harder to remove but hey you can't always get what you want :)

I've canceled the two other profiles (tree support and fuzzy skin) until I got the same overhang results, so stay tuned!

TIP

In case you print with dark filaments, especially with matte finish, it's possible you'll have some white spots like these, after removing the supports:

If so just use a butane torch and pass the flame rapidly on these zones and you'll have the natural color again:

Comment & Rating (206)

@pippo1997

Boosted

Print Profile

Improved Overhang Quality 0.2mm layer, 2 walls, 15% infill

Downscaled, polish, UV Resin and after yellow paint! This is the result! Anyway really nice model (I cut the nose because I didn't like it).

@Riskey

Amazing!

@sba3dcrafts

I tested the colors of my paints that I haven't used yet, thx for the model (better than painting a plastic spoon)

@user_4043623964

Hello! What did you paint them with? They look amazing!

Show original

@prhodesj

can anyone help me improve the top surfaces and the underbelly. printing on p1s with tree supports

The designer has replied

@steve_82

I’m working on another profile that improve the underbelly. The top is due to the curve and the layer height, I don’t think there’s much to do but I’ll try

@steve_82

Way better with this settings. I’ll upload it asap

@prhodesj

Replying to @steve_82 :

Brilliant thanks. I managed to get the top surface way better by using variable layer heights. After doing some research I read that sagging on an overhang (even with supports) can be improved by increasing fan speeds (for extra cooling) during overhangs, increasing number of walls, printing inside walls before outer walls and even lower nozzle temp slightly for overhangs. Hope this helps and look forward to seeing your improvements.

@Cepheo.

Boosted

impresión sencilla, rápida y muy chula. los soportes son un poco difíciles de retirar, igual hubiera sido mejor los orgánicos. no obstante gracias por compartirlo con la comunidad.

(Edited)

@user_423349654

trae soportes?

@Cepheo.

Boosted

Replying to @user_423349654 :

muy buenas, si trae soportes pero se quitaron bien y no dejaron marca, yo le desactivaria los del hocico, son innecesarios y dificiles de quitar pero los otros son absolutamente necesarios.

@Mitch23

Print Profile

0.2mm layer, 2 walls, 15% infill

My family absolutely loves this print. It looks awesome and printed very easily. As others have noted, there were some issues with the surface finish, especially where the supports touched the print you can see in my photos. However, despite this, when it’s displayed on a shelf, you can’t even notice it and I still highly recommend the print. I did notice that there is another profile that was posted that supposed to help with this issue. I have to give that a try.

The designer has replied

@steve_82

Thank you for your comment! Wonderful colors. For the support defects you should definitely try the other profile :)

@amariglia

Boosted

Print Profile

Improved Overhang Quality 0.2mm layer, 2 walls, 15% infill

I love it, truly fantastic

Show original

@user_3110441009

cool

@wingedpower

Print Profile

0.2mm layer, 2 walls, 15% infill

this balloon dog printed out very well. the design itself is perfectly fine. for me, I had some issues with surface quality where the support material interfaced with the undersides in the first try. the second attempt, I used PETG(overture PETG clear) as the main print material and PLA(Bambu Labs basic white) as the interface material, 0.00 z distance, normal supports. printed very nicely. Infill made it look like cracked ice. might try again with no infill?

@ronniesoliz66

suspect balloon 😬

@furiyh

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice print

The designer has replied

@steve_82

Glad you liked it :)

@G3zous

Print Profile

Improved Overhang Quality 0.2mm layer, 2 walls, 15% infill

looking really good my daughter is very happy

@user_1068503815

these are amazing

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Balloon DOG HotDog

makerpinf

Balloon Hovercraft MK3 With Working Propeller

Watson's Lab

749

908

Sitting Balloon Dog

WhimsyWanderDesign

Valentine's Balloon Dog

WhimsyWanderDesign

735

1.1 k