Venusaur Multicolor by entroisdimensions_figurine

entroisdimensions_figurine

Miniatures>Creatures

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

50.7 h

2 plates

4.5(66)

Single colour, 30%, 0.16mm layer, 2 walls, 15% infill

2.1 h

1 plate

4.9(14)

0.2mm layer, 2 walls, 15% infill

37.4 h

2 plates

4.0(10)

Open in Bambu Studio

Boost

714

1122

127

110

2.4 k

745

Released

Description

Venusaur is now available, and you have the choice between different file formats:

STL
3mf for Multicolor Bambu Lab printer
3mf for Multicolor Prusa printer

The model is in two parts the body and the flower.

Video of printing the model: YouTube, Instagram, Tiktok

For printing, I used PolyTerra PLA filament from Polymaker:

7 colors version:

PolyTerra PLA Arctic Teal (for the body)
PolyTerra PLA Forest Green (for the leaf)
PolyTerra PLA Sakura Pink (for the flower)
PolyTerra PLA Army Red (for the eyes iris and the ears)
PolyTerra PLA Cotton White (for the claw, white of the eyes, pupil and flower pattern)
PolyTerra PLA Savannah Yellow (for the top of flower)
PolyTerra PLA Wood Brown (for the trunk)

4 colors version:

PolyTerra PLA Arctic Teal (for the body and the trunk)
PolyTerra PLA Forest Green (for the leaf)
PolyTerra PLA Sakura Pink (for the flower, flower top, eyes iris and ears)
PolyTerra PLA Cotton White (for the claw, white of the eyes, pupil and flower pattern)

To discover which new models will be released next, follow @polymaker_figurines:
Instagram, TikTok, YouTube

Join the Figurines Community on Discord

Happy Printing!

-----------------------------------------------

Printer settings on the Bambu Lab X1C

Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Filament brand: Polymaker
Filament color: Teal, Green, Pink, Red, White, Yellow, Brown
Filament material: PolyTerra PLA

Comment & Rating (127)

@JEDIMrWick

Print Profile

0.2mm layer, 2 walls, 15% infill

made this into a planter.

@3DGather

That is so creative. Thanks for the sharing the idea.

@Lee_1064_8400

how big did you scale it up?

@JEDIMrWick

Replying to @Lee_1064_8400 :

as big as it would go and still fit on the plate.

@robtomrein

Print Profile

0.2mm layer, 3 walls, 10% infill

Beautiful print, but the flower failed 5 times for me with a variety of support settings. I ended up splitting it and printing at the picture orientation with tree supports.

@Beeeerk7

Ich habe Probleme mit dem Bauch.. Hast du seine Settings für Support so übernommen?

@user_2195532720

it is very nice

@user_523707469

You need more support if the belly fails. Try removing "only critical areas" and the belly should work

Show original

@Aleandrus

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

After the mini blastoise squad, I enjoyed printing a team of Venusaurs. It's a nice model and the flower on his back looks lovely. Thanks for sharing it =)

@vietfarmer21

wow where u get the blastoise?

@Aleandrus

Boosted

Replying to @vietfarmer21 :

Always here on Makerworld, but from another maker: https://makerworld.com/models/192999

@NeoKoiPrints

Print Profile

0.2mm layer, 3 walls, 10% infill

The support settings were on point for this model, mouth was a bit difficult to get out but everything else was super simple. Good job

@sladexos

Very nice print - good job. What color/brand do you use for the main body (teal)?

@NeoKoiPrints

Replying to @sladexos :

polymaker

@TallyWhackr69

Print Profile

0.2mm layer, 3 walls, 10% infill

Took around 50 hours to print both the body and flower on my X1C, but it turned out great! I followed the author's color suggestions except that I went with a slightly darker pink for the flower and the lighter Sakura Pink for the tongue

@debbhuy

Print Profile

0.2mm layer, 3 walls, 10% infill

had issues with the head so added more supports underbelly was not smooth had to use normal supports for flower flower took forever mostly it was all supports

@BrCombs

had it fail 4 times with trees. Trying with normal supports now.

@Ethanprint3D

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Perfect with standard supports

Show original

@feixinlong

Print Profile

0.2mm layer, 3 walls, 10% infill

this is good idea

@user_3033002122

Print Profile

Single colour, 30%, 0.16mm layer, 2 walls, 15% infill

I painted it myself. Verry high quality profile

@timco

Superb multi-part print!!!!

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bulbasaur Multicolor

entroisdimensions_figurine

506

2.3 k

9.9 k

BENCHY

JayRay

322

4.5 k

164.8 k

Mega Lego-like Minifigure (10:1 scale)

Julia Ebert

1.6 k

3.1 k

11.3 k

PokeBall

N3D

2 k

3.3 k

15.5 k