Hat / Cap hooks, wall mount storage for your hats, cap holder by TDH 3DP

TDH 3DP

Fashion>Clothes

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 8 walls, 40% infill

2.5 h

1 plate

4.8(33)

0.16mm layer, 8 walls, 40% infill

2.8 h

1 plate

4.3(6)

Open in Bambu Studio

Boost

100

185

487

356

Released

Description

A simple hat storage solution, holds 5 hats/caps, secure and easy to use.
Printed sideways and with no supports.

Comment & Rating (41)

@devnsyde

Print Profile

0.16mm layer, 8 walls, 40% infill

The print profile I used was using supports where they were not needed and had the print laying on its back, I changed the profile to not use the supports and instead print on the side as instructed by the author. Now it's a clean and strong print. Thanks to the author for sharing the design!

(Edited)

@Beauzel

Print Profile

0.16mm layer, 8 walls, 40% infill

Prints great and does a great job

@A3Dprints

Boosted

Print Profile

0.16mm layer, 8 walls, 40% infill

good print

@skittles2007

Print Profile

0.16mm layer, 8 walls, 40% infill

very easy print required no supports very sturdy and easy to print 10/10 recommend !!

@user_312118440

Print Profile

0.16mm layer, 8 walls, 40% infill

easy fast print. holds hats fine - know others said they had issues but it works well for baseball / trucker style hats.

@Bisreal

Print Profile

0.16mm layer, 8 walls, 40% infill

this is exactly what my husband has been missing in his life! That said, the one modification i'd make is a second print profile with a nail hole to hang it with nails instead of tape.

@Phil_Carpenter

Boosted

This thing came out looking great! TY!