Funnel for AMS silica gel beads dry pod box by eds_3d_shopMakerWorld: Download Free 3D Models

eds_3d_shop

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Designer

49 min

1 plate

4.9(181)

Funnel for Big silica pod [PLA]0.2mm layer, 2 walls, 20% infill

Designer

32 min

1 plate

4.8(24)

Funnel for Small silica pod (slim/corner) [PLA]0.2mm layer, 2 walls, 20% infill

Designer

33 min

1 plate

5.0(14)

Open in Bambu Studio

Boost

289

667

468

1.7 k

1.2 k

Released

Description

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

Funnel for AMS silica/dry pods

Perfect funnels for big (three in the middle) and small (two slimone on the corner) silica dry pods for Bambu Lab AMS or AMS Silica Dry Box for Aqara Humidity Sensor 👌😍

Most funnels for the popular pods are inserted, have to be held by hand and do not allow the pods to be filled to the brim…😒

These funnels are very easily put on instead of the lid (but specifically not as tight as the lid!) and stay on the pods by themselves and can be comfortably held together with the pod on the funnel handle! In addition, the pods can be easily filled to the brim because they are clipped on from the outside.👌

A beautiful bamboo logo fits perfectly on the handle and there is a small grip-bar at the bottom, which is very comfortable to hold!

Print / Install Instructions (or just use one of my print-profiles!)

place them with the logo on the build plate
first layer line width: 0,38 (0.4 mm Nozzle) (for perfect look of the bambu-logo)
first layer speed: 20ms per second (for perfect look of the bambu-logo)
2 perimeter, 5 top, 3 bottom layer, 20% infill
top surface pattern: Concentric
bottom surface pattern: Concentric
print layer height: 0.2mm
WALL generator: Arachne

— ! —

Thanks for downloading, rating in advance and please don't forget to like this model! ;-)

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (468)

@ByteSlinger

Print Profile

Funnel for Big silica pod [PLA]0.2mm layer, 2 walls, 20% infill

It printed perfectly, however it turns out it's not for use with the AMS silica boxes I have so it doesn't fit. But for the right boxes it looks great.

The profile uploader has replied

@eds_3d_shop

They looks really great! Thank you for cool rating and make! Maybe for your next AMS you will print my silica Boxes and these Beauties will fit there?😉🙏👍

@ByteSlinger

Replying to @eds_3d_shop :

I already use a few of your great designs. I'd managed to miss that you design the feeding funnel protectors. I use them on all my AMS and love them, but I have noticed that a couple have started to slip recently. I was going to re-print them but just realised I'm pretty out of date with them. I'm still using the V2s but I see you now have V4.1 out so may be time for a re-print on all of them (though I see there's a few different V4.1, is the only difference aesthetics?).

@eds_3d_shop

Thank you for using my designs! 🙏😃 Do you printed v.2.1 with PLA (silk/matte)..? I think it’s could be a problem. Try to print one of v.4.1 (which one - is your choice, the difference is only logo design/face) with PLA+ or PETG. This will help. 🖐️😃

@wyld

Boosted

Print Profile

Funnel for Small silica pod (slim/corner) [PLA]0.2mm layer, 2 walls, 20% infill

Works perfectly.

The profile uploader has replied

@eds_3d_shop

Thank you for your cool make, feedback and awesome rating! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@wyld

Boosted

Replying to @eds_3d_shop :

Done!

@eds_3d_shop

Replying to @wyld :

Thank you very much! 🙏😍👍

@KlausKolbe007

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Passt perfekt 👌

The profile uploader has replied

@eds_3d_shop

Wow! wirklich sehr coole Make! 🦾😎Dankeschön dafür! 🙏😍 Dürfte ich die tolle Bilder in Description aufnehmen? 🙏😍👍

@KlausKolbe007

Na klar

@eds_3d_shop

Replying to @KlausKolbe007 :

Top! Dankeschön! 🙏😍👍

@EricEJ

Boosted

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Printed perfectly and no more desiccant all over the floor when filling my containers. Thank you for sharing.

The profile uploader has replied

@eds_3d_shop

Thank you for your awesome rating, make and feedback! 🙏😍👍 It was the idea! 🤩👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@EricEJ

Boosted

Replying to @eds_3d_shop :

I was out of boosts for the week, but I planned on giving you a boost after I got a couple more. Boosting you now.

@eds_3d_shop

Replying to @EricEJ :

Thank you very much, Eric! 🙏😍 I’m happy to hear that this design is helping you. I can good understand it ✊😇👍

@Nattermt

Print Profile

Funnel for Big silica pod [PLA]0.2mm layer, 2 walls, 20% infill

passt gut!

The profile uploader has replied

@eds_3d_shop

🦾😍👍Thank you for the wonderful review and feedback! I'm thrilled! 🙏😍👍 Should you wish to—with a click on the Boost button (or the small rocket on the website)—you would greatly support my work on such designs! 🙏😍 By the way, I have even more of these designs for Bambu Lab 3D printers; feel free to browse! Thank you in advance! Best regards, Ed 🖐️😃

Show original

@Faran3D

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

print perfect and work great

The profile uploader has replied

@eds_3d_shop

Cool make! 🦾😍🙏Thank you for your awesome rating and great feedback! 🙏😍👍 If you like this design and want to support me - you can boost 🚀 this design and print my perfect tuned print-profiles! 🙏😍 Happy printing and feel free to check my other BambuLab designs! 🖐️😍👍

@princeofthehous

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

good

The profile uploader has replied

@eds_3d_shop

🦾😍🙏Thank you for your awesome rating and cool feedback! 🙏😍👍 If you like this design and want to support me - you can boost 🚀 this design and print my perfect tuned print-profiles! 🙏😍 Happy printing and feel free to check my other BambuLab designs! 🖐️😍👍

@bdq_pt

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Printed just fine no issues. Slight imperfections near the vertical seam, but im blaming it on the cheap pla used (no clue if it was or not), and it not gonna affect the purpose of them so... all good

The profile uploader has replied

@eds_3d_shop

Yea, Seam is difficult on the round objects, but your make looks top! 🦾😍🙏Thank you for your awesome rating and such cool feedback! 🙏😍👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😍👍

@GNTZ

Boosted

Fits perfectly and very useful

The designer has replied

@eds_3d_shop

🦾😍🙏Thank you for your awesome feedback and great make! 🙏😍👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😍👍

@ThePixelHero

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

All is well, as with every product from this designer :-) Thank you

The profile uploader has replied

Show original

@eds_3d_shop

🙏😍👍Thank you for the wonderful feedback and amazing make! I'm thrilled! 🙏😍👍 Should you wish to – a click on the Boost button (or the little rocket on the website) will greatly support my work on such designs! 🙏😍 By the way, I have even more of these designs for Bambu Lab 3D printers; feel free to browse! Many thanks in advance! Best regards Ed 🖐️😃

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.