Hueforge Sunflower Heart

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PolyLite Brown Transmission Distance: 0.5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Yellow Transmission Distance: 11
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Brown
At layer #14 (1.2mm) swap to Orange
At layer #20 (1.68mm) swap to Yellow
At layer #27 (2.24mm) swap to Yellow
At layer #33 (2.72mm) swap to White for the rest.