Octopus Mosaic - 4 Color Filament Painting by ShakaStudioMakerWorld: Download Free 3D Models

ShakaStudio

Art>2D Art

IP Report

GIF

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

H2D

A1 mini

200mm WIDE - 0.08mm layer, 1 walls, 100% infill

Designer

4.6 h

1 plate

5.0(9)

175mm A1mini - 0.08mm layer, 1 walls, 100% infill

Designer

3.7 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

103

148

141

107

Released

Description

This model has been carefully designed to look great with 4 colors.
Only filament swaps! No AMS necessary.

This does not need an AMS to print, but it does make it easier.

If you have an AMS, print directly from the provided print profile.

If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.

When scaling the model, scale in the X and Y direction only. Leave Z at 100%.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Black TD : 0.5
Blue TD: 2.8
White TD: 5.6
Red (Matte) TD: 2

Swap Instructions:
    Start with Black
    At layer #9 (0.88mm) swap to Blue
    At layer #12 (1.12mm) swap to White
    At layer #16 (1.44mm) swap to Black
    At layer #19 (1.68mm) swap to Red
    At layer #22 (1.92mm) swap to White for the rest.

Comment & Rating (18)

@wildcat019

Tnx i love it

@aczarelli

Print Profile

200mm WIDE - 0.08mm layer, 1 walls, 100% infill

I love this print so much I wish it was twice the size. The photo doesn't do it justice.

@rectangular

Boosted

Thank you. Great work.

@egaidos

Print Profile

200mm WIDE - 0.08mm layer, 1 walls, 100% infill

print came out great! used PLA basic red and it turned out darker which is what I wanted.

@user_491964223

Print Profile

200mm WIDE - 0.08mm layer, 1 walls, 100% infill

Amazing print.

@Law_rra

Print Profile

200mm WIDE - 0.08mm layer, 1 walls, 100% infill

Really cool. My filament are more translucent but prints good

@jonoitz

Thanks for this! When I slice it, I only see 19 layers but the swap instructions say to change to white at #22. Is 19 the last layer or is there something I'm missing?

The designer has replied

@ShakaStudio

I have a height range modifier which is changing the layer height numbers. Check the height in mm (1.92mm) to see if its matching correctly.

(Edited)

@nakolkin

How would you set Flushing Volumes if printed with AMS?

The designer has replied

@ShakaStudio

keep it default. the amount of poop is very minimal. almost nothing. no need for prime tower either. I recommend using the provided settings and printing directly

@NeoKoiPrints

Boosted

very artsy

@253Bigfoot

Print Profile

175mm A1mini - 0.08mm layer, 1 walls, 100% infill

Love this

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.