MagSafe Charging Stand (Standby Mode) by Grant

Grant

Household>Other House Models

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

1.9 h

1 plate

4.9(127)

For A1, Mini, 0.2mm layer, 2 walls, 15% infill - 2 Plates

2.1 h

2 plates

4.8(24)

3 in 1 0.2mm layer, 2 walls, 20% infill

3 h

1 plate

5.0(13)

0.16mm layer, 2 walls, 15% infill

1.2 h

1 plate

4.5(2)

Click to see more

Open in Bambu Studio

Boost

403

812

190

159

2 k

1.3 k

Released

Description

This is a super simple to print charging stand that utilizes your MagSafe charger. No supports required, and fully modular to fit your phone (as long as it has MagSafe).

If you like my work, consider buying me a coffee :)

Update 8/5/23: Support for older style Apple Watch chargers!

I have added models for the older style (non-fast charger) Apple Watch chargers, as well as the updated bases since the older chargers use USB-A connectors on the end. This means that you need to make sure you are using the correct pieces for your setup. I have put the new bases under the BASES folder and labeled them for the old chargers. I created new folders for the watch charger pieces and labeled the non fast chargers as REGULAR.

As a note, these pieces only work on the genuine Apple Watch chargers. Any third party charger will very likely not work.

Use this as a guide if you are unsure of which charger you have:

Bases:

There are 4 bases: A phone only base, a watch only base, and two combined bases. The difference between the two combined bases is that the compact version brings the watch and phone a little closer together. Only use the compact base if you have an iPhone 12 or 13 Mini.

Other Pieces:

There are pieces for every phone that supports MagSafe, so make sure you are downloading the right piece! There are also tighter and looser tolerance versions of each piece (the tolerance has to do with the charger interface, not the interface with the base piece).

There are also different pieces for the different sized watches. There are pieces for each size of watch, as well as the different types of chargers (fast charger or non fast charger).

Print at 0.2mm layer height. Really only 2 perimeters are needed, but if you want more go right ahead. 15% infill does just fine and keeps filament usage down.

Lay all models flat, with the cable channels facing down

If you are having trouble getting the phone or watch piece to fit in the base, try scaling the base up by 1%. This should help the pieces fit together easier.

Assembly video:

Comment & Rating (190)

@DamianSov

Printed in PETG, but you could use PLA I just wanted a stronger material. Everything fits together perfectly with the right amount of snug. Made a profile for anyone who wants to print the 3 in 1 version of the model. This will charge the iPhone Pro Max, 45mm iWatch, and will wireless charge earbuds. Requires 2 magsafe chargers and I have the fast charge watch charger.

@PiperCubbs

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice fit.

(Edited)

@3dLogic

Boosted

bro, wrong model

@kevin76

Print Profile

0.2mm layer, 2 walls, 15% infill

top

@user_3982846026

looks great! does it need to be weighted at all?

@PietDeVries

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent model. I did end up printing it with the user facing sides down and some supports, to make full use of the textured bed.

(Edited)

@kwindolph

Boosted

Print Profile

For A1, Mini, 0.2mm layer, 2 walls, 15% infill - 2 Plates

real nice print. Fits really well.

@murthara

Boosted

Very nice! Worked perfectly.

@Locos08

Print Profile

0.2mm layer, 2 walls, 15% infill

Unfortunately, the watch's cable doesn't fit The large MagSafe's cable sheath was considered, but unfortunately not the watch charging cable I tried cutting it, but that unfortunately didn't work Otherwise, beautiful model 👍🏻