DASSAULT RAFALE

DASSAULT RAFALE

Boost
164
290
42

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini
H2D

0.16mm layer, 2 walls, 10% infill
0.16mm layer, 2 walls, 10% infill
Designer
3.7 h
1 plate
4.3(40)

Open in Bambu Studio
Boost
164
290
42
31
843
235
Released

Description

Rafale reproduction. The Dassault Rafale is a French multi-role fighter aircraft produced by Dassault Aviation. It features a delta wing and canard fins, has a pair of Snecma M88-2 turbofan engines mounted in the tail section, and a single wide fin. It was designed for use by both the French Air Force and Naval Aviation as an embarked aircraft, hence the term omnirole used by Dassault Aviation to define the aircraft. It is also intended for export, and many foreign countries have shown interest in the Rafale, including India which in 2012 entered into exclusive negotiations with Dassault Aviation for the purchase of 126 aircraft worth around 12 billion dollars .

 

NOTE: USE ONLY THE PRESET SET UP.

Comment & Rating (42)

(0/5000)

Magnificent matte PLA print, no issues with the original print profile settings. Thank you very much.
Show original
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
well detailed model
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
vraiment pas mal !!! Ça pourrait mériter les 5* mais quelques détails sont manquants ou pas parfait... franchement je reste quand même hyper satisfait et ça reste un très bon modèle, à quelques micro détails
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
On the P1s, it is necessary to adjust the support settings for the print to succeed, otherwise the model is accurate
Show original
1
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
A truly exquisite model, a faithful reproduction Bravo
Show original
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
Do not have other color in the Print. Please put some colors and launch
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
well designed
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
very cool
0
Reply
to print you need to know a minimum of the principles of printing 3D, and not rely on luck. 👌
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
Other Issues:started stringing and messing up everywhere
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.