Organizer for small things (25mm Height)

Copyright Claim

Organizer for small things (25mm Height)

Boost
512
1095
142

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
19.6 h
10 plates
4.9(108)

0.2mm layer, 2 walls, 15% infill, brim
0.2mm layer, 2 walls, 15% infill, brim
20.1 h
10 plates
4.7(3)

0.2mm layer, 3 walls, 12% infill
0.2mm layer, 3 walls, 12% infill
20.5 h
10 plates

Open in Bambu Studio
Boost
512
1095
142
40
1.8 k
1.5 k
Released

Description

Organizer for small things (25mm Height)

I do a lot of printing of small devices and for them I have a lot of small nuts, bolts and different modules.

My practice has shown that it is more convenient and compact when the container is placed on the container.

I hope you will find this organizer useful.

 

There are also organizers with a height of 16mm

There are also organizers with a height of 25mm

There are also organizers with a height of 40mm

 

And also I would like to tell you that I recently started a small store on Etsy.com here will appear instrementy and exclusive projects that will not be in the open access.

 

My some other things:

Table Adjustment Knob M3 PCB Etching Tray Speed Controller 220V Mоdular Mini Circular Clock, Counter Subscribers. Compass - Plotter Phone Clip. Phone Stand Mini Grinder Disc Sander Duo. D50mm, D75mm Lifting Gear For Automatic Nozzle Cleaner Mini electric lighter Stand for toothpaste Camera Weight for Diving Electric lighter The best soldering iron stand Flux stand Magnetic plate for little things Clamp for firmware controllers 6 pins 2 relays box or ESP-01 with relay Case for Ndemcu Alphabet for children. A B C D E Alphabet for children. F G H I J Alphabet for children. K L M N O Alphabet for children. P Q R S T Alphabet for children. U V W X Y Z Replacement SD Card Case Solder feeder USBasb case Magnet stick

 

 

Comment & Rating (142)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill, brim
Nice design, but anyone can explain me what happened here!?
The designer has replied
0
Reply
looks like under extrusion. did you try another filament?
0
Reply
Boosted
Replying to @frank.amrhein :
yes, I think it has something to do with aux fan. I printed them with bambu filament (original profiles) and geeetech (custom profile with aux at 0%). Just these one printed with bambu filament have these artifacts.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very nice boxes works great but printed it with new brand of pla and too fast
(Edited)
Other Issues
The designer has replied
1
Reply
It looks like the plastic didn't have time to melt. Just slow down.
0
Reply
Works great :-) Really fantastic design - my printer has been so busy with those boxes now :-D Ender 3v3SE, 0.3mm height, 10% gyroid, 2 walls (approx. 2h30m)
The designer has replied
0
Reply
I'm watching you put the stickers on the outside of the container. And I thought I'd have to make a flat area for the stickers.
1
Reply
Replying to @RuvimKUB :
It really depends on the quality and age of the sticker. Those are AliExpress D1 tapes for the DYMO printer. The clear and black stick very well, but the white required a bit of convincing
0
Reply
非常棒的设计节省许多空间
The designer has replied
1
Reply
Beautiful!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
fit great together, I love all the different size compartments
The designer has replied
1
Reply
I am pleased that my project is beneficial. Thank you for your feedback!
0
Reply
Thank you for your design and for sharing it. I think the idea is genius and really useful. However, I'm encountering some problems with it. I've printed a 3x5 pattern organizer. The outer walls are thick and solid, with nearly 2.4mm of thickness. But the partition walls are extremely thin, at around 0.3mm, and that's why they are easy to break. Is it supposed to be like this? And if it is, are there any ways to make them thicker?
The designer has replied
0
Reply
This was done to save kplastic. I have these glasses that do not break and work well. But I have had several people write to me about this and I have corrected it in the new containers and the wall is thicker. You can see in the description that there are several containers of different heights and in newer versions there is no such problem.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Love these! Perfect solution for my beading supplies. Thank you for sharing!
0
Reply
These are fantastic little storage containers and exactly what I needed for storing wargaming counters for Advanced Squad Leader. These are smaller than the smallest bead box I could use and because I need a bunch, I am saving a ton of space.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Print came out great
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Very handy!
0
Reply